Contents
How do I fix my PETG?
Another quick fix for PETG stringing is to increase travel speed. The quicker the nozzle moves between two points, the less time melting filament will have to ooze. Try increasing your printer’s travel speed in 10-mm/s increments until you find the perfect speed. Some makers even use travel speeds of up to 200 mm/s.
Does PETG need cooling?
Since PETG experiences minimal warping, it’s best to have cooling fans on. This will increase the overall quality of prints, and improve overhangs. That said, it’s recommended to set them to somewhere between 20% and 50%. PETG filament is also hygroscopic, meaning that it will readily absorb moisture from the air.
How do I know if my 3D printer nozzle is bad?
How much is retraction for PETG?
Retraction distance should be set at about 6 or 7 millimeters for Bowden extruders, and 3 or 4 millimeters for direct drive extruders. With PETG, retraction speed is more important than distance. If you still have oozing and stringing, try lowering the retraction speed.
Does PETG go bad?
ABS filament may expire within a month of humidity exposure, while bio-plastics such as PETG and PLA may last one to two years respectively, without going bad. … Water moisture is a 3D printer filament worst enemy, but even brief exposure to air can damage an entire spool.
What temp does PETG soften?
85 ºC
Is PETG easy to sand?
Coating PETG 3D Printer Filament It sands really easily and gives your parts a glossy finish right off the bat if you don’t intend on sanding it further.11 sept. 2017
Is PETG or abs stronger?
PETG is more durable than ABS, but ABS is harder, and more rigid. PETG has a lower glass transition temperature, at 80C compared with ABS’s 105C. ABS is approximately 20% less dense than PETG. PETG won’t warp like ABS might (if printed incorrectly) and is generally odourless.6 jui. 2018
Is PETG waterproof?
PETG, a modification of PET, which is used in water bottles, is a great material for making waterproof prints. PETG is commonly considered to be waterproof and also has an excellent thermal resistance.11 mai 2021
How do I know if my printer nozzle is clogged?
Manually push the material out of the nozzle, once it has fully heated up. The material should slowly protrude out of the nozzle. If it doesn’t, this means your nozzle is clogged.
Do 3D print nozzles wear out?
There are many additional costs and headaches that come along when you own a 3D printer, and one of the first issues you’ll encounter is that the nozzles will wear out and the print quality will go from a smooth & good looking finish, to something that looks like it was dropped from the 3rd floor.
How often should I replace my 3D printer nozzle?
There isn’t a specific time frame in which you should change or replace your nozzle, but generally you should change your nozzle every 3-6 months.
How fast should you print PETG?
between 60 and 100 mm/s
What is a good retraction speed for PETG?
PETG has a higher melting temperature than PLA so we recommend setting your hot end temperature between 235 and 250°C. ALWAYS use a fan with PETG as it tends to cool the filament in the hot end and help with retractions. Keep your retraction speed slow at 40mm/s or less.5 déc. 2015
Does PETG absorb moisture?
PETG is hygroscopic, which means it will actively absorb moisture from the air. For this reason, PETG plastic should be stored in a cool, dry place, and dried if exposed to humid air for too long. … Vacuum-sealed bags and desiccant packs ensures that the filament is exposed to as little moisture as possible.21 oct. 2016