Contents
What is OctoLapse?
OctoLapse is a plug-in for OctoPrint, a popular third party set-top box system for most desktop 3D printers. … OctoPrint runs on these computers and essentially controls your 3D printer via its USB connection. Jobs can be started, stopped and monitored.28 août 2018
How do I reuse a failed 3D printer?
Reuse 3D Printed Waste Turn your 3D printed waste into new spools using a 3D printer filament recycler. The typical recycler will smash failed prints into smaller pieces, melt them down, and force the liquid plastic through an opening. The hot plastic is then cooled down and coiled onto a reel.21 déc. 2018
Can you 3D print a playable record?
While vinyl records are making a comeback, manufacturing them has always been outside the capabilities of hobbyists. … The good news is, 3D printing technology can and has been used to print records! The bad news is, you’re going to need a pretty high-resolution printer to do it.26 mar. 2020
How much time does Octolapse add?
Yes it adds up, but its a few minutes over a multi-hour print at most.
Is Octolapse free?
Octolapse is free and open source after all.24 mar. 2018
Why do my 3D prints keep failing?
Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. This jam builds up more and more until the hotend stops extruding altogether, leaving your print unfinished.
How do you shred a failed 3D print?
What can you do with a broken 3D printer?
1. Build Something Cool. One of the easiest ways to recycle prints is to combine two or more into something new and unique.
2. DIY Filament Recycling Machine.
3. Make ABS Juice.
4. Recycle Locally.
Can you still buy records?
There are plenty of options out there where you can still get vinyl and CDs delivered to you. Many of the great individual record stores are still open, and now would be a marvelous time to support them. … Just like Discogs, you can snare releases directly from a record shop’s eBay storefront as well.18 mar. 2020
What can you print out?
1. Print your own pinhole camera. Most of us have used our printers to run off hard copies of our favourite snaps.
2. Poster-sized prints.
3. Kids’ games and masks.
4. Print a camera lens hood.
5. Greetings cards.
6. Stickers.
7. Create stationery.
8. Enlarge old photos.
Can PVC be used in 3D printing?
AONIQ PVC can be used in much the same way as traditional 3D polymers like PLA or ABS. … So it seems that PVC is a great material for 3D printing, at least functionally. There is another option for PVC: Chemson has produced a PVC filament that could theoretically be used in filament-based desktop 3D printers.17 août 2017
How do I set time lapse on OctoPrint?
1. Insert the SD card for your Raspberry Pi into your computer, and open the boot partition.
2. Open the “octopi.
3. All settings are disabled by default.
4. If you’re using a USB camera, you can find its setting on Line 25.
5. If you’re using a Pi Camera, the FPS setting is on Line 62.
What is Z hop speed?
Z Hop at Retraction | ideaMaker profile The specified z hop value is the distance the nozzle gets lifted away from the surface of the model during retraction. This helps prevent nozzle from scratching again the printed part when traveling across.
How do I install Mjpg streamer on Raspberry Pi?
1. Step 1: Login to your Pi. Replace HOSTNAME with the hostname of your Pi.
2. Step 2: Update the Operating System.
3. Step 3: Enable the camera.
4. Step 4: Create a Project Folder.
5. Step 5: Download mjpg-streamer.
6. Step 6: Compile mjpg-streamer.
7. Step 7: Set an Environment Variable.
8. Step 8: Run mjpg-streamer.
How do I install an octopus?
1. Download the latest version of OctoPi from the GitHub repository (currently 0.18 or newer).
2. Unzip the downloaded image.
3. Insert your SD card into your computer.
4. Open up Etcher, select your SD card, select the OctoPi image, and click “Flash”.
5. Once it’s done, you’re good to go!
