Contents
How do you Extrude a sketch in SolidWorks?
Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears. Edit the properties in the Base Extrude PropertyManager.
Can you boss Extrude in assembly SolidWorks?
SolidWorks lets you sketch on any reference plane in Assembly environment. You can extrude the sketch with the help of Extrude from Feature Tab. You can also follow the same method with existing part in assembly also. Hope this helps.
How do you sketch a part in assembly in SolidWorks?
Click New Part (Assembly toolbar) or Insert > Component > New Part. For externally saved parts, type a name for the new part in the Save As dialog box and click Save. Select a plane or planar face (while the pointer is ). Editing focus changes to the new part and a sketch opens in the new part.
Can we Extrude the sketch in both direction yes or no?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
Can you extrude a sketch in an assembly?
You can create extruded and revolved cut features in assemblies. To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut. … Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
How can a part be created in the assembly mode?
To create a part within an assembly: Click New Part (Assembly toolbar) or Insert > Component > New Part.
What is Extrude command in Creo?
An extrude feature is based on a two-dimensional sketch. It linearly extrudes a sketch perpendicular to the sketching plane to create or remove material. You can either select the sketch first then start the Extrude tool, or you can start the Extrude tool and then select the sketch.
What is difference between one side and both sides in extrusion?
17) What is the difference between One Side and Both Sides in extrusion? One-side extrudes only one specified direction from the sketching plane. Both sides extrudes both sides of the sketching planes.
Can we extrude the sketch in both direction in Ansys?
Yes, using extruded direction selection in the box under the end condition drop down.
How do you extrude a 3D sketch boss?
You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create a 3D model from.
What color are sketch entities that are under defined?
The color of sketch entities indicate its constrained status: Blue means under-constrained. Black means fully constrained. Red means a constraint problem (over-constrained)
How do you add a boss in SolidWorks?
The mounting boss feature can be found under Insert> Fastening feature > Mounting Boss. The mounting boss command requires a face or 3D point on which to locate the geometry on. The procedure which I have found helpful is to select a face in the general position that you want the boss to go.
How do you cut a shape in SolidWorks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
How do you add a derived sketch in Solidworks?
Select the sketch from which you want to derive a new sketch. Hold the Ctrl key and click the face on which you want to place the new sketch. Click Insert > Derived Sketch. The sketch appears on the plane of the selected face, and the status line indicates that you are editing the sketch.
Is it possible to extrude a line?
if a line is in the xy-plane, you can extrude it into the z-plane in surface mode. The surface thus created is then thickened with “Thicken” perpendicular to the surface to form a body.
