Contents
How do you cut a 3D sketch Extrude?
You can also go to the toolbar and click Insert -> Cut -> Extrude to pull up the Cut-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create the 3D model feature.
Can you Extrude a 3D sketch in Solidworks?
Click Insert > Surface > Extrude. Select a face: To extrude from a 3D face, select a 3D face.
How do you cut Extrude in Solidworks?
Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.
Can we extrude the sketch in both direction?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
Why can’t I extrude cut in SolidWorks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
How do you switch planes in 3D sketch in Solidworks?
To change the coordinate system for your 3D sketch, click the desired sketch tool, hold down the Ctrl key, and click a plane, a planar face, or a user-defined coordinate system. If you select a plane or a planar face, the 3D sketch planes rotate so that the XY sketch plane is aligned with the selected item.
How do you sketch on Boss Extrude in Solidworks?
You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create a 3D model from.
Can we exclude the sketch in both directions?
Yes, using extruded direction selection in the box under the end condition drop down.
Can you extrude an open sketch in Solidworks?
Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.
Why is extrude cut greyed out?
It is greyed out because, as you have described it, you have bodies and not surfaces. TL;DR (more info below): You need to convert the solid body to a surface to use the Trim Surface. Or you need to use something like an Extruded Cut if you are only working with bodies. Or you need to use surfaces from the beginning.
How do you 3D sketch in Inventor?
To begin an Inventor 3D sketch, simply click the Start 3D Sketch button on the ribbon. At first, not much will look different between the 2D sketching and 3D sketching environments. Many of the same sketch tools are available in both sketching environments including lines, arcs, and splines.
What does the Convert Entities sketch tool do?
The Convert Entities tool allows users to make a copied projection of a given sketch, face, or set of edges onto the active sketch plane. These sketch entities will update their size and/or positioning if either of these characteristics changes in the source sketch.
What is extrusion direction?
The extrusion direction is the normal vector of the plane that contains the. entity. In the case of a line entity, it’s the direction that thickness. will be applied to the line.
What is use of revolve feature?
Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.
Can you do a 3D sketch in Fusion 360?
There is an option in the preferences called “Allow 3D sketching of lines and splines”. … ALL sketches in Fusion 360 are also 3D in nature. Below is an active sketch with line and spline elements. With the same sketch active, simply selecting the Move/Copy tool, you can drag sketch elements into 3D space.
