Contents
How do you cut a shape in Solidworks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
Why can’t I extrude cut in SolidWorks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
Can we extrude the sketch in both direction yes or no?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
What is swept cut?
Solidworks swept cut is features tool, mainly used to cut a solid model or part by sweeping a completely closed profile along an open or closed path. To use swept cut, you should need a closed profile and open or closed path, which may be line, helix, and circle, rectangular or arc etc.
Can you sweep a body in Solidworks?
Under the SOLIDWORKS Cut Sweep command, there is an option which allows you to select a solid body instead of a sketch as a profile to produce the cut. The following image shows two bodies and a helix which works as the path for the sweep command. Solid Body #2 represents the cutting tool.
What is swept cut solidworks?
Set the PropertyManager options based on the sweep cut feature. To open this PropertyManager: Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path.
Why is extruded cut grayed out?
It is greyed out because, as you have described it, you have bodies and not surfaces. TL;DR (more info below): You need to convert the solid body to a surface to use the Trim Surface. Or you need to use something like an Extruded Cut if you are only working with bodies. Or you need to use surfaces from the beginning.
Can we exclude the sketch in both direction?
Yes, using extruded direction selection in the box under the end condition drop down.
Which option is used to extrude the sketch that passes through all surfaces?
Select an existing sketch and then click Model > Extrude. This method is referred to as object-action. Select a datum plane or planar surface to use as the sketching plane and then click Model > Extrude.
How can one improve the quality in the sweep cut feature with a solid body as a tool?
Question: How can I improve the quality in the Sweep Cut feature with a solid body as a tool? Answer: The result is influenced by geometries, continuity, and their complexity. Create an Extrude solid as a Tool Body, it is better than a Revolved solid.
What special piece of sketch geometry is useful but not required for a revolve feature?
What special piece of sketch geometry is useful, but not required for a revolve feature? Centerline.
Where is the Split command in Solidworks?
To split bodies: Click Split (Features toolbar) or Insert > Features > Split.
Where is the split feature in Solidworks?
You can create separate part files, and form an assembly from the new parts. You can split one or more solid or surface bodies. To split a surface, the Trimming Surface must extend past the boundaries of the surface to split. Click Split (Features toolbar) or Insert > Features > Split.
How do you cut a plane with bodies in Solidworks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
What is boundary boss in SolidWorks?
You can specify sketch curves, edges, faces, or other sketch entities to control the shape of a boundary feature. When you select entities to define the boundary feature in two directions, you can select curves influence options that control how the selected entities influence the design.
