Contents
What does zero thickness mean in Solidworks?
Zero-thickness geometry (also known as non-manifold geometry) exists when edges or vertices in a solid model do not properly connect with adjacent geometry. … SOLIDWORKS does not allow zero thickness geometry because it can lead to mathematical problems and downstream errors in the model.
When a plane is perpendicular to a reference plane its projection on that plane is a?
11. When a plane is perpendicular to a reference plane, its projection on that plane shows its true shape and size. Explanation: When a plane is perpendicular to a reference plane, its projection on that plane is a straight line.
When you select multiple edges to chamfer a flag is displayed?
True or False: A Chamfer can be applied to an edge, face, or vertex. When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.
What are reference planes How many reference planes are normally used?
1.1 shows the three standard reference planes: the medial (mid-sagittal), the frontal (or coronal), and the transverse planes, all at 90 degrees to each other and usually set to meet in the center of mass of the whole body.
How do you draw a reference plane in Solidworks?
Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane . The software creates the most likely plane based on the entity you select. You can select options under First Reference, such as Parallel, Perpendicular, and so forth to modify the plane.
How do you hide reference planes in Solidworks?
Hiding or Showing Individual Planes To hide or show individual planes: Right-click the plane in the graphics area or in the FeatureManager design tree. Select Hide or Show. Individual planes always are highlighted when you select them, even when hidden.
How do I create a plane at an angle to another plane?
The trick is simple: select a plane as the first reference and then select the multiple plane option BEFORE you pick the axis. Then select the angle option and type in 10 degrees and 36 in the ‘Number of planes to create’. This creates all 36 instantly!
How do you use interference detection in Solidworks?
Interference Detection PropertyManager. You can select components to check and set options for types of interferences to find, and then calculate results. To open this PropertyManager: Click Interference Detection (Assembly toolbar) or Tools > Evaluate > Interference Detection.
Can you move the origin in SolidWorks?
You can change the origin location and orientation in blocks. To change the origin location or orientation: Create blocks from several sketch entities. … Click Tools > Sketch Tools > Align > Align Grid/Origin.
How do you move a shape in SolidWorks?
To move, copy, rotate, or mate a solid or surface body: Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy . Specify parameters to move, copy, or rotate bodies. Apply mates between bodies.
When a line is inclined to VP and parallel to HP the front view will be to XY line?
If a line is parallel to H.P., its front will be to XY line. 12. If a line is parallel to V.P., its top view will be to XY line.
When a point is above HP and behind VP The point is resting in?
Explanation: The position of reference planes will be similar to quadrants in x, y plane co-ordinate system. As the 2nd quadrant lies above the x-axis and behind the y-axis here also the 2nd quadrant is above H.P, behind V.P.
When a point is above HP and behind VP?
Projection of Points • There are basically nine type of projections of point is space : 1. In FIRST Quadrant (Above H.P. , In front of V.P.) 2. In SECOND Quadrant (Above H.P. , Behind V.P.) 3. In THIRD Quadrant (Below H.P. , Behind V.P.) 4.
How do you make an offset sketch Onshape?
First, select the offset tool from the sketch toolbar. Click the curve that you want to offset, and move the arrow, either inward for a negative offset, or outward for a positive offset. Double-click the dimension and enter a value on your keyboard to create a positive offset.
What is use of reference plane and write its types?
Depending on the type of body being described, there are four different kinds of reference planes that are typically used: The ecliptic or invariable plane for planets, asteroids, comets, etc. within the Solar System, as these bodies generally have orbits that lie close to the ecliptic.
