Contents
How do you draft a face in Solidworks?
Go to Solidworks menubar, click on the “Insert Menu” , then you can see drop down menu. From that, select “Features” and you can see side drop down menu and in that click on the “Draft” tool to select it.
What is draft analysis solidworks?
With draft analysis, you can verify draft angles, examine angle changes within a face, as well as locate parting lines, injection, and ejection surfaces in parts. You can also perform draft analysis using the DraftXpert.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
How do you extrude a draft?
Draft in an extrusion can also be used to create tapered parts. In a straight extrusion the draft angle is 0°, so all extruded surfaces are perpendicular to the original profile. Draft modifies an extrusion by adjusting the angle between the extruded surfaces and the original sketch plane.
How do you show the ribbon in Solidworks?
Keyboard shortcut: To minimize or restore the ribbon, press Ctrl + F1. Search ‘Ribbon Tabs’ in the SOLIDWORKS Knowledge Base.
How do you use the Hole Wizard in Solidworks?
You can use the Hole Wizard to create customized holes of various types. To create hole wizard holes, create a part and select a surface, click Hole Wizard (Features toolbar) or Insert > Features > Hole > Wizard, set the PropertyManager options, and click .
Why we do draft analysis?
The Draft Analysis command enables you to detect if the part you drafted will be easily removed. This type of analysis is performed based on color ranges identifying zones on the analyzed element where the deviation from the draft direction at any point, corresponds to specified values.
How does solidworks calculate draft?
To perform an analysis: Click Draft Analysis (Mold Tools toolbar) or View > Display > Draft Analysis . Set analysis parameters and color settings, and then click .
What is Draft command why it is used?
The Draft feature adds a draft angle from -89.9° to +89.9° to individual surfaces or to a series of surfaces. You can draft only the surfaces that are formed by tabulated cylinders or planes. … Pull direction (also called draft direction)—Direction that is used to measure the draft angle.
What is exploded view in Solidworks?
When you explode multiple components in one step, you can space them equally along an axis. You can edit an explode step to add, delete, or reposition components. You can edit an explode step while you create the exploded view or after you save the view. You can delete an explode step from an exploded view.
What is the use of wrap tool in Solidworks?
The wrap feature supports contour selection and sketch reuse. You can project a wrap feature onto multiple faces. The sketch plane must be tangent to the face, allowing the face normal and the sketch normal to be parallel at the closest point.
Can we apply the fixed angle mate between to curves?
You can control component motion in an animation by mating the component to a single entity curve, using coincident mates, or to a multiple entity curve, using path mates. You can also use a curve to define camera-based walk-through animations.
What is a neutral plane draft?
You can create a feature that tapers selected model faces by a specified angle, using a Neutral Plane to determine the direction of pull for creating molds. You can also apply a draft angle as a part of an extruded base, boss, or cut. …
How do you extrude a hole in SolidWorks?
Go to features toolbar and select the extrude cut button as shown below. You can see the yellow color preview of circular hole from the selected surface. Select the “blind” as extrude type. Then you can drag by clicking on the direction arrow in the sketch.
How do I simplify a Solidworks model?
Click Simplify (Tools toolbar) or Tools > Find/Modify > Simplify. On the Simplify Task Pane: Select items in Features to specify the types of features to search for. Set the Simplification factor to increase or decrease the insignificant volume factor.
