Contents
How do you extrude a sketch?
Select an existing sketch and then click Model > Extrude. This method is referred to as object-action. Select a datum plane or planar surface to use as the sketching plane and then click Model > Extrude.
Why can’t I extrude a sketch in fusion?
Right-click on the affected sketch within the timeline or the browser tree. Select “Edit sketch”. Activate “Show Profile” and save the change. Re-test extruding the sketch profile.3 mai 2021
What is extrude in Fusion 360?
Well, let me tell you. The Fusion 360 extrude tool can be used 100 different ways. … The “From Object” will allow you to select a construction plane, face, point, etc. to drive where the extrude will start. Take it to the next level and play around with the offset distance from the selected object.4 avr. 2017
Can you extrude a line in Fusion 360?
You can extrude lines in the Surface workspace, but you’ll need to Thicken them before you can use a Combine/Cut or Join command with them. In the Solid workspace, you can only extrude closed profiles (They will turn yellow when the boundary is closed).4 oct. 2019
Can we extrude the sketch in both direction yes or no?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
Can you extrude an open sketch?
Yes is Possible to Extrude!, but you have to be in the Patch Mode, and then use the Extrude from the Create sub-menu.16 août 2018
How do you press pull a Fusion 360?
How do you modify extrude in Fusion 360?
Yes, you can. If you have a ‘design history’ enabled (by default it is) you should have your sketch and extrusion feature in line at the bottom of the screen. Right click on the sketch or extrude feature and you will see the ‘edit option’. In this way you kinda ‘go back’ in time and make changes there.8 jui. 2018
How do you split an object in Fusion 360?
How do you mirror a sketch in Fusion 360?
How do you thicken a body in Fusion 360?
Can we extrude a line?
extrude allows you work with closed profile. Line doesn’t have the profile. I would recommend you to create sketch with circles or another shapes and extrude it. With extruded feature you can create pattern.13 avr. 2015
Can we exclude the sketch in both direction?
Yes, using extruded direction selection in the box under the end condition drop down.19 jan. 2012
How do you edit a extrude boss in Solidworks?
What is extrude boss in Solidworks?
Figure 2: Extrude Insert. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create a 3D model from. The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face.11 avr. 2018