Contents
How do you dimension a spring in Inventor?
How do you make a 2d spring in AutoCAD?
1. Click Home tab Draw panel Helix. Find.
2. Specify the center point for the base of the helix.
3. Specify the base radius.
4. Specify the top radius or press Enter to specify the same value as the base radius.
5. Specify the height of the helix.
Is Autodesk Inventor easy?
Inventor has a lot of utilities at your disposal and is quite easy to learn and has a very friendly user interface as well, depending on your CAD knowledge.
How do you make a shaft in Inventor?
Edit shafts using Shaft Generator Open the Autodesk Inventor assembly with the already inserted Design Accelerator shaft. Select the shaft, right-click to display the context menu, and select Edit Using Design Accelerator . Edit the shaft. You can add, delete features and sections, edit the calculation parameters.14 avr. 2021
How do I automatically add dimensions in Inventor?
1. In a sketch, click Sketch tab Constrain panel Automatic Dimensions and Constraints .
2. (Optional) In the Auto Dimension dialog box, deselect either of the following:
3. In the graphics window, select the geometry you want to automatically constrain and dimension.
How do you change inches to mm in Inventor 2020?
To change the default unit of measure in the active file, go to Tools tab Options panel Document Settings and then select the Units tab in the dialog box. Select the Length drop-list to change units such as inches to mm.14 avr. 2021
How do you create a coil spring in AutoCAD?
1. Specify center point of base:
2. Specify base radius or [Diameter] <1.0000>:
3. Specify top radius or [Diameter] <291.5944>:
4. Specify helix height or [Axis endpoint/Turns/turn Height/tWist] <1.0000>:
How do you draw a helical spring?
Youtube video link: https://m.youtube.com/watch?v=iEYnk4j2d3E
How do you draw a spring?
Is Inventor hard to learn?
Inventor is hard to learn – Au contraire, mon ami. … The point is, it’s intuitive, so you can learn without formal training. However, if you want to design a robot dog, you will need formal training – from a robot.26 nov. 2018
Is Fusion 360 better than Inventor?
Inventor is better suited to engineering or mechanical applications, while Fusion 360 is better suited to consumer product design. Many designers like to master both applications and use both for their different features. … Both products are available on a subscription or pay as you go model.
Should I learn Inventor or SolidWorks?
While some prefer the user-friendliness of SOLIDWORKS, some find Inventor as a better alternative to suit specific requirements. … That being said, Inventor still has multiple features that come as standard compared to the basic SOLIDWORKS version. Additionally, Inventor has significantly low cost of ownership.22 fév. 2021
How do you make gear in Inventor 2020?
1. On the ribbon, click Design tab Power Transmission panel Spur Gear .
2. On the Spur Gears Component Generator, Design tab: Enter the values for the Common section. In the Gear 1 section, select Component from the list. In the Gear 2 section, select Component from the list.
3. Click OK.
How do you make a bearing in Inventor?
1. On the ribbon, click Design tab Power Transmission panel Bearing .
2. On the Bearing Generator, Design tab: Select the shaft cylindrical face and start plane. The shaft diameter value is automatically inserted on the Design tab. Select the type of Bearing from Content Center.
3. Click OK.
How do you design a shaft bearing?
1. Shafts should be thick and short.
2. Housings should possess sufficient rigidity.
3. The fitting surface of the shaft and housing should be finished in order to acquire the required accuracy and roughness.
4. The fillet radius (ra) should be smaller than chamfer dimension of the bearing.