Contents
How do you use the rectangular pattern in Inventor 2020?
How do I edit a pattern in Inventor?
Right-click a pattern element in the graphics window and choose Edit Pattern. Change any values in the Rectangular Pattern or Circular Pattern dialog box and click OK. Double-click a pattern dimension in the graphics window to change it.14 avr. 2021
How do you use the circular pattern tool in Inventor?
How do I make a circular array in Inventor?
1. On the ribbon Sketch tab Pattern panel, click Circular .
2. Select the sketch geometry to pattern.
3. Click the Axis command, and then select the point, vertex, or work axis to use as the pattern axis.
4. Count Specify the number of elements in the pattern.
5. Angle Specify the angle to use for the circular pattern.
How do I remove a rectangular pattern in Inventor?
1. In the browser, select the sketch, right-click, and then select Edit Sketch.
2. Select the sketch pattern geometry to delete.
3. Right-click and select an option. The selection options are determined by selected geometry. Nonpattern geometry: Delete removes the selected geometry.
What is a rectangular pattern?
A drainage pattern in which the main streams and their tributaries display many right-angle bends and exhibit sections of approx. the same length; it is indicative of streams following prominent fault or joint systems that break the rocks into rectangular blocks.
How do you make an object solid in Inventor?
One of the ways of doing that is using the Thicken / Offset tool. Select all faces (more options in the More tab), select the thickness and hit OK. Now because your surface has a thickness, it becomes a solid, as it now has some volume.17 déc. 2020
How do I delete a constraint in Inventor?
How do I make a hole pattern in Inventor?
How do you make a circular pattern?
1. Create one or more features to replicate.
2. Click Circular Pattern (Features toolbar) or Insert > Pattern/Mirror > Circular Pattern.
3. Set the PropertyManager options.
4. Click .
How do you make a circular pattern in Solidworks?
1. In an open sketch, click Circular Sketch Pattern. (Sketch toolbar) or Tools > Sketch Tools > Circular Pattern.
2. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
3. Under Parameters: Click Reverse direction .
4. Click .
Where is circular pattern in Inventor?
1. Click circular command.
2. In the graphics window, select the features, bodies, … that you want to create circular pattern.
3. In the circular pattern dialog, select tool under rotation axis and select the rotation axis in the graphics window.
How do I create a circular pattern in Autocad?
How do you make a bolt circle in Inventor?
what version of Inventor are you using? just use the Centerline tool and select the center of the first hole, then the second hole, then the third hole, the centerline will switch to an arc at this point, continue on selecting holes to complete the pattern.21 sept. 2005
How do I delete a sketch in Autodesk?
1. To delete one or more sketches, tap. , then the sketch or sketches from the Gallery or from within a folder.
2. Tap and select. Delete. The sketch appears in the Trash folder.