Contents
Can you do assemblies in Inventor LT?
Inventor LT is designed to work with only parts (excluding sheet metal part) and their drawings, so the above mentioned functionalities are not supported. IDW or DWG drawings containing assembly, presentation, or sheet metal part cannot be opened either.19 oct. 2020
Can you do configurations in Inventor?
You can control configurations with one primary file. Use View representations to save display configurations that you can recall by name when you work on the component. Use Positional representations to configure an assembly in different positions and states.14 avr. 2021
What is inventor iPart?
An iPart is one design that is available in various sizes or with other variables. To Generate Member File from iPart. Generate files from member rows in the iPart factory. To Place iParts in Assemblies. You can place standard or custom iParts, update iParts, and create a member file when placing iParts or iAssemblies.14 avr. 2021
How do you add a configuration in Inventor?
Create part families that differ by size, material, or other variables. Create an iFeature from an iPart or from a set of features and specify the geometry that is used to position it on a part. You can edit iFeature files, placed iFeatures, and iFeature sketches.14 avr. 2021
How do I suppress a feature in iPart?
Add the features to the iPart table, and then specify the suppression status for the features in each row of the table. Note: You can also specify a Custom Parameter Cell or Custom Parameter Column for each feature to compute or suppress. When the iPart is placed, you enter the needed suppression status.14 avr. 2021
How do I use Iparts?
When you suppress a feature that has dependent features what happens to those dependent features?
The behavior of the feature and its dependents is as follows: Dependent features are suppressed when the parent feature is dragged below the End of Part marker. Features with no dependencies are deleted. Dependent features can be deleted or retained for later use.14 avr. 2021
How many total ways are there to constrain an assembly?
There are 5 different types of constrains in the Assembly tab: Mate, Angle, Tangent, Insert, and Symmetry.
How do you lock a part in Inventor assembly?
How do you align parts in Inventor assembly?
How do I use Inventor assembly?
To create an assembly in Inventor, insert components into an assembly or create parts and subassemblies inside an assembly file. Then, use commands to define relationships, position, and DOF. Edit the individual components without leaving the assembly file.14 avr. 2021
Which is the first constraint in assembly?
The first part you place in an assembly is grounded. Its position is fixed, with the part origin coincident with the assembly origin. When you place the next part and constrain it to the grounded part, it moves to the grounded part.1 avr. 2012
What is a mate constraint?
A Mate constraint positions selected components face to face or with the faces flush. The geometry you select is usually a component face, but you can also select curves, planes, edges, or points.14 avr. 2021
What is the purpose of assembly constraints?
Assembly constraints establish the orientation of the components in the assembly and simulate mechanical relationships between components. For example, you can: Mate two planes. Specify that cylindrical features on two parts remain concentric.14 avr. 2021
How do I constrain in Inventor 2021?
In an active sketch, click Sketch tab Constrain panel Coincident Constraint (2D)or3D Sketch tab Constrain panel Coincident Constraint (3D sketch). In the graphics window, click to set the point to constrain. Click the geometry to which the point is constrained.14 avr. 2021