Contents
How do you make bolts in Inventor?
Open the Autodesk Inventor assembly with the already inserted Design Accelerator bolted connection. Select the bolted connection, right-click to display the context menu, and select the Edit Using Design Accelerator command. In the right side of the Design tab, add or delete components.14 avr. 2021
How do you make a hex bolt in Inventor?
1. Invoke a sketch in Inventor and make a polygon with 6 sides i.e., a hexagon.
2. Finish the sketch.
3. Extrude the profile to a certain limit.
4. Click OK to finish extrusion.
5. Right click on this plane and invoke a sketch.
6. Sketch a circle->finish sketch.
7. Extrude it.
8. Click on thread.
Where do you get bolts in Inventor?
How do you insert nuts and bolts in Inventor?
1. Select the bolt shank to identify the appropriate nut diameter and thread, or proper washer diameter. Then, select the target planar face. You can select a circular edge of a hole to insert nut, washer, and so on.
2. Click Apply.
How do I create a thread in Inventor 2021?
To create a new thread, click the plus sign . (Optional) Under Advanced Properties, if desired, clear the Display thread in model check box to hide thread graphics when the thread is created. Click OK.14 avr. 2021
How do you make threads in Inventor 2020?
1. Type: Specify a thread type from the list defined in the spreadsheet.
2. Size: Specify a nominal size (diameter) for the chosen Thread Type.
3. Designation: Specify a pitch.
4. Class: Specify a thread class for the chosen Size and Designation.
5. Direction: Specify the direction of the thread.
How do you make a polygon in Inventor?
How do you make an octagon in Inventor?
How do you make a hexagon in Inventor 2018?
1. On the ribbon Sketch tab Draw panel, click Polygon .
2. Select the inscribed or circumscribed icon in the Polygon dialog box.
3. Specify the number of edges.
4. Click the center of the polygon.
5. Drag to determine the size of the polygon.
6. To quit, press Esc , click another command, or in the Polygon dialog box, click Done.
How do you get fasteners in Inventor?
1. Above the hole thumbnails and descriptions, select the Click to add a fastener text.
2. Select ISO from the Standard menu to filter the selection.
3. Select ISO 4016.
4. Select the Click to add a fastener text, located directly under the bolt thumbnail, and then select ISO 7092.
What type of Inventor file is used to show an exploded assembly?
Presentation files
How do you add hardware to inventor?
1. On the Assemble tab Component panel , choose the drop-down arrow under Place to access the Place from Content Center command.
2. Expand the section titled Shaft Parts.
3. Expand the sub-section titled Circlips, and select External.
4. Select ANSI B 27.7M in the dialog box, and then choose OK.
Which 3D tool requires two sketches one for the profile and one for the path?
The Sweep tool requires two unconsumed and visible sketches in order to create a swept feature. One of the sketches must contain the profile to be swept (profile sketch), while the other sketch must contain the curve along which the profile will be swept (path sketch). The path sketch could be a 2D sketch or 3D sketch.19 jan. 2013
Where do washers go on nut and bolt?
If there is only one washer used with a nut/bolt, it usually goes on the nut side. The nut in most circumstances is more movable, and is more commonly turned to tighten the assembly. The washer helps prevent damage to the surface of the object being fastened.
How do I access the Content Center in Inventor?
1. In the Projects dialog box, click the Configure Content Center button on the right.
2. In the Configure Libraries: Project name dialog box, ensure the Custom Content library is selected .
3. Click OK.