Contents
How do you trim multiple in Microstation?
How do you trim hatch in Microstation?
1. Select the edges bounding the concrete and the square shape that you don’t want patterned.
2. Isolate the selection using Displayset.
3. Repattern the area using the following settings (obviously set Pattern/Scale/Angle as required)
How do I extend a line in Microstation?
How do I use the hatch area in MicroStation?
To hatch around text inside of a closed element use the Flood method, select the down arrow in the lower right corner of the Tool Settings window to “Show Extended Settings”. Select the Locate Interior Text icon. Using this option will cause the hatching to go around the text within the closed element.
How do I create a pattern in MicroStation?
1. Open the Cell Library dialog box by going to Element>Cells.
2. Choose the cell you would like to use as your pattern, and click on Pattern.
3. Open the Pattern Area tool, which can be done by going to Tools>Patterning>Pattern Area.
How do you create a cell in MicroStation?
How do you cut an element in MicroStation?
Trim Elements. Select a line to be the “cutter.” Then select a line, circle or arc it intersects. Click on the side of the cutter you want eliminated.
How do you crop in MicroStation?
1. In the Raster Control tool box, select the Clip tool.
2. In the tool settings, set Method to Block and Mode to Clip Boundary.
3. If more than one raster image is attached, identify the image to be clipped.
4. Place a data point to define the first point of the clipping block.
How do you flood a pattern in MicroStation?
Annotate > Hatch Tool (Flooded) > Press Ctrl + Shift > Select the areas to flood.24 fév. 2017
How do you draw a rectangle in MicroStation?
How do you send a hatch to back in MicroStation?
1. Select the element(s) to be sent to back.
2. Open the Level Display dialog and turn on all of your levels.
3. Using Power Selector invert mode select every element in your model.
What is a MicroStation cell?
A cell is a group of elements combined into one complex element and stored in a cell library or in your design file as a shared cell. Any cell can be easily recalled and placed, and then manipulated as a single element within MicroStation. … With proper setup, any cell can be used in any drawing.
MicroStation shared cells are similar to AutoCAD blocks. A shared cell is a cell whose elements are stored only once in the DGN file, regardless of how often the cell is placed within the DGN file. Any change made to one instance of a shared cell reflects in all instances of that shared cell.
How do you find cells in MicroStation?
How do I see attributes in MicroStation?
1. From the References dialog box select the Reference File in the dialog you want to work with.
2. From the Reference dialog box pull down menu Settings > Presentation.
3. Check ON Use View Flags.
4. Toggle ON or OFF the View Attributes you want for the reference file.