Contents
How do you trim hatch in MicroStation?
1. Select the edges bounding the concrete and the square shape that you don’t want patterned.
2. Isolate the selection using Displayset.
3. Repattern the area using the following settings (obviously set Pattern/Scale/Angle as required)
How do I change hatch pattern in MicroStation connect edition?
1. Create new element template.
2. Add>Pattern/Hatch Settings.
3. Change Area Pattern Is Annotation value to True(this should be the default value)
How do you match hatch in MicroStation?
MicroStation V8. 5 – If you use the SmartMatch tool on a hatched/patterend element, it will match the symbology of the boundary element and not the hatch. To match the symbology of the hatching, select Match Pattern Attributes and enable Match Symbology.19 jui. 2008
How do I change the pattern scale in MicroStation?
1. Open Hatch Area/Crosshatch Area and change the value(s) (i.e scale was 10 should be 5)
2. Go to Tools > Patterning > Change Pattern.
3. check Pattern Parameters and select the hatch pattern that needs to be rescaled.
How do I fill in MicroStation?
How do you join lines in MicroStation?
Press “Alt + T” to drop down the tools menu and from “Groups” select the very first option that says “Create Complex Chain.” Go ahead and click the 2 lines that you would like to join and then click anywhere a third time. Your lines are now a singular element. Or even more simply, a Line.
How do I create a pattern in MicroStation?
1. Open the Cell Library dialog box by going to Element>Cells.
2. Choose the cell you would like to use as your pattern, and click on Pattern.
3. Open the Pattern Area tool, which can be done by going to Tools>Patterning>Pattern Area.
How do you match patterns in MicroStation?
Match Pattern Attributes MicroStation prompts: Match Pattern Attributes> Identify element (Identify the element containing the pattern to be matched.) Match Pattern Attributes > Accept/Reject (select next input) (Click the Data button to accept the element or click the Reset button to reject it.)
How do you hatch in Openroads?
How do I match properties in MicroStation V8?
1. Go to the Change Attribute tool.
2. Click on eyedropper(Match Element Attributes)
3. Select the attributes you want to match by checking appropriate boxes.
4. Select new element to apply the attributes from first element.
How do you hatch in MicroStation v8i?
To hatch around text inside of a closed element use the Flood method, select the down arrow in the lower right corner of the Tool Settings window to “Show Extended Settings”. Select the Locate Interior Text icon. Using this option will cause the hatching to go around the text within the closed element.
How do I scale a drawing in MicroStation v8i?
How do I delete a fill in MicroStation?
How do you shape an opaque in MicroStation?
1. Select the Shape or Element in the view by clicking on it once.
2. Right click on the Element and select Properties from the pop-up menu (Element Information in older versions), see image 3.
3. The Element Information dialog appears, from the General section click in the Transparency field and choose a value.