Contents
How do you hatch in MicroStation?
To hatch around text inside of a closed element use the Flood method, select the down arrow in the lower right corner of the Tool Settings window to “Show Extended Settings”. Select the Locate Interior Text icon. Using this option will cause the hatching to go around the text within the closed element.
How do I change hatch pattern in MicroStation connect edition?
1. Create new element template.
2. Add>Pattern/Hatch Settings.
3. Change Area Pattern Is Annotation value to True(this should be the default value)
How do you flood a pattern in MicroStation?
Annotate > Hatch Tool (Flooded) > Press Ctrl + Shift > Select the areas to flood.24 fév. 2017
How do you trim hatch in MicroStation?
1. Select the edges bounding the concrete and the square shape that you don’t want patterned.
2. Isolate the selection using Displayset.
3. Repattern the area using the following settings (obviously set Pattern/Scale/Angle as required)
How do you send a hatch to back in MicroStation?
1. Select the element(s) to be sent to back.
2. Open the Level Display dialog and turn on all of your levels.
3. Using Power Selector invert mode select every element in your model.
How do I fill an area in MicroStation?
How do I create a pattern in MicroStation?
1. Open the Cell Library dialog box by going to Element>Cells.
2. Choose the cell you would like to use as your pattern, and click on Pattern.
3. Open the Pattern Area tool, which can be done by going to Tools>Patterning>Pattern Area.
How do you hatch in Openroads?
How do you change the hatch scale in MicroStation?
1. Open Hatch Area/Crosshatch Area and change the value(s) (i.e scale was 10 should be 5)
2. Go to Tools > Patterning > Change Pattern.
3. check Pattern Parameters and select the hatch pattern that needs to be rescaled.
How do I make a complex shape in MicroStation?
1. Create Complex Shape > Identify element (Identify the first element to include in the complex shape.)
2. Create Complex Shape > Accept/Reject (Select next input) (Identify the next element to include in the complex shape and continue selecting elements in order until all elements are selected.
How do you join lines in MicroStation?
Press “Alt + T” to drop down the tools menu and from “Groups” select the very first option that says “Create Complex Chain.” Go ahead and click the 2 lines that you would like to join and then click anywhere a third time. Your lines are now a singular element. Or even more simply, a Line.
Where is the Create Region tool MicroStation?
1. Ribbon: Drawing > Home > Groups.
2. Ribbon: Modeling > Home > Groups.
3. Toolbox: Groups.
How do you trim multiple in MicroStation?
How do you cut between two lines in MicroStation?
How do I change order of references in MicroStation?
1. Go to File > Reference to open the References dialog box.
2. In the Reference dialog box, go to Settings > Update Sequence to open the Update Sequence dialog box.
3. In the Update Sequence dialog box select the Reference (or active file) and then click the up or down arrow buttons to move the file up or down.