Contents
How do you lock an element in MicroStation?
By default, the level lock is off. You can turn this lock on through the Locks settings dialog. To display this dialog, from the main menu select Settings menu > Locks > Full. Turn on the Level Lock option to enable this lock.
How do I lock axis in MicroStation?
1. Firstly open the menu: Settings > Locks > Full. This opens the Locks dialog to allow you to see which locks are switched on and off.
2. The lock axis may be set ON, and can be seen in the following keyin: Utilities>Keyin> Lock Axis.
3. The Grid Lock may also be checked ON, Select the following:
How do you turn Ortho on in MicroStation?
1. (V8i) Settings > Design Files > Axis > make sure (Axis Lock) is turned OFF.
2. (CONNECT) > Settings > File> Design Files > Axis > make sure (Axis Lock) is turned OFF.
3. OR to toggle ortho OFF or ON.
4. key in: Lock axis toggle.
What is ACS in MicroStation?
ACS (Auxiliary Coordinate Systems)25 fév. 2014
How do you hide cells in MicroStation?
Hide Elements by using options in the right click menus Enable the display set view attribute. Select all elements and place them into a display set. Release the selection set. Then select those elements you wish to hide and remove them from the display set via the SHIFT+Right Click menu.27 oct. 2011
What is by level in MicroStation?
MicroStation levels are used to separate and distinguish your drawing objects. … After you have done, you want to add more objects in different category, but you don’t want to mess your previous drawing. So you take a transparent paper and place it above your previous drawing.
What is Ortho in MicroStation?
AccuDraw. AccuDraw is a powerful MicroStation feature that increases drawing productivity by tracking previous drawing steps and anticipating the next steps. When AccuDraw is active, the AccuDraw settings box appears on the MicroStation desktop and the AccuDraw compass appears on data points.
How do you use AccuDraw in MicroStation?
How do I change the default snap in MicroStation?
1. From the bottom Status bar select the Snap icon. In the pop-up menu select Button Bar.
2. Select Settings > Locks > Full from the top menu bar. In the Locks dialog change the Snap Mode drop-down to Keypoint.
How do I turn off the grid in MicroStation?
1. Open the View Attributes dialog > Ctrl + B.
2. Toggle the Grid On/Off for the desired view.
Where are snaps in MicroStation?
To access the multi-snap dialog box, you can choose The Snaps>Multi-Snaps option from the Settings menu at the top of the MicroStation screen, choose the “Multi-Snaps” option from the Snaps menu via the Information/Status bar at the bottom of the MicroStation screen, or you can right-click over the Multi-Snap button on …
How do you rotate AC in Microstation?
To rotate the active ACS Select the Rotate Active ACS tool. The Rotate Active ACS dialog box opens. In the Rotate fields, enter the rotation angles, in degrees, from left to right, for the x-, y-, and z-axes.
How do you rotate AccuDraw in Microstation?
How do you select everything on one level in MicroStation?
Select a single level Click the level. Select many levels at once Click and drag through the level list. Select non-contiguous levels in the list
How do you change levels in MicroStation?
1. Select all lines (as you have done)
2. Choose the Change Attributes tool.
3. Ensure that the Level checkbox is ticked.
4. Pick the level you want from the option button.
5. Datapoint in your DGN model to accept the change.