Contents
How do you create a slab reinforcement detail in AutoCAD?
How do you detail a slab?
How do you draw a slab section?
How do you draw beam details in AutoCAD?
1. Click Layout tab > Create View panel > Detail drop-down > Circular. …
2. Click the view to use as the parent view. …
3. Click in the drawing area to define the center of the area to magnify. …
4. Click to specify the diameter of the area to magnify.
What is 2way slab?
Two way slab is a slab supported by beams on all the four sides and the loads are carried by the supports along with both directions, it is known as two way slab. … In two way slabs, the load will be carried in both the directions. So, the main reinforcement is provided in both directions for two way slabs.15 mai 2020
How does AutoCAD calculate slab area?
How much steel is required for slab?
Thumb rule for Steel required for RCC slab is 80 kgs/m3, then quantity of steel required for 100 sq ft ( 0.944 m3) rcc slab is equal to = 80 × 0.944 = 75.5 Kgs.
How do I create a slab manually?
What is LX and LY in slab?
For any slab, if Ly = Lx, the slab has a tendency to bend in both directions. With an increase of Ly, the tendency of bending along Ly is reduced and that on Lx is increased. When Ly/Lx ≥ 2, the slab bends only in X directions.
What is slab reinforcement?
Reinforcement detailing of a slab is done based on its support conditions. Slab may be supported on walls or beams or columns. Slab supported directly by columns are called flat slab. … In two way slab main reinforcement is provided along both direction. Slabs could be simply supported, continuous or cantilever.25 sept. 2013
How do you create a section detail?
What is the difference between one way and two way slab?
The one-way slab is supported by a beam on two opposite side only. The two-way slab is supported by the beam on all four sides. In one-way slab, the load is carried in one direction perpendicular to the supporting beam. In two-way slab, the load is carried in both directions.
How do you draw beam details?
What are the types of beam?
1. Timber Beam. Timber Beam Frame Structure.
2. Steel Beam. Steel Beam.
3. Reinforced Concrete Beam. Reinforced concrete beams are the important structural element of a building that are designed to carry transverse external loads.
4. Composite Beam.
5. Simply Supported Beam.
6. Fixed Beam.
7. Overhanging Beam.
8. Double Overhanging Beam.