Contents
How do I create a scope box in Revit 2020?
How do I create a section box in Revit 2018?
1. Open a 3D view.
2. On the Properties palette, under Extents, select the Section Box option.
3. Click OK.
4. Select the section box and use the drag controls to modify the extents, as necessary. The following image shows the section box selected with the blue arrow drag controls visible.
Why is scope box greyed out Revit?
There are some situations where the Scope Box property of a view is greyed out – so you cannot assign a Scope Box to the view. The answer may be to do with the Crop Boundary – and it may not be obvious, especially if the crop boundary is hidden.
What is the difference between Scope Box and section box in Revit?
However, once a scope box is created, it is going to be visible in the other view categories: sections, callouts, elevations and 3D views. In elevations and sections, the scope box is only going to be visible if it intersects the cut line. You can adjust the extents of the scope box in all view categories.5 sept. 2018
How do I enable a section box in Revit?
1. Enable the section box in a 3D view.
2. Open an associated view such as a plan view or an elevation view.
3. In the Project Browser, right-click the 3D view name, and click Show Section Box.
4. In the associated view, drag the blue arrow controls to resize the section box.
Where is section box in Revit?
To display the section box, in the Properties palette for a 3D view, select Section Box. When a section box is first displayed, the extents of the visible geometry are used to define the extents of the section box. Select the section box and use the grip controls to resize the extents.8 mar. 2021
How do you create a section 3D in Revit?
1. Open a plan, section, or elevation view.
2. Click View tab Create panel 3D View drop-down Camera.
3. Click in the drawing area to place the camera.
4. Drag the cursor to the desired target and click to place it.
How do I lock a section view in Revit?
To lock the view, go to the View Control Bar at the bottom of the Revit interface and click on the little house with the padlock (Lock 3D View). Click this icon and choose the ‘Save Orientation and Lock View’ option.28 nov. 2016
What is a scope box in Revit?
Scope boxes are automatically visible in 3D views and any view whose cut plane intersects the scope. They can also be set to display in elevation views. You can set their visibility for other views by resizing them or changing their visibility property. Scope boxes do not print in construction documents.
How do you edit a scope box in Revit?
1. Open a plan or 3D view, and select the scope box. Handles appear on the scope box.
2. Drag the handles to resize the scope box. As you resize the scope box, if a view plane no longer cuts through the scope box, the scope box is not visible in that view.
How do you hide a scope box in Revit?
1. Click Modify | Scope Boxes tab View panel Hide in View drop-down (Hide Elements).
2. Right-click a scope box, and click Hide in view Elements.
How do you save a section box in Revit?
1. Create a duplicate view: In the Project Browser, right-click the 3D view to export, and click Duplicate View Duplicate.
2. Add a section box: For information about section boxes, see Change the Extents of a 3D View.
3. Export the 3D view defined by the section box: Click File tab Export, and select an export option.
How do you make a Scope Box?
How do you rotate a section box in Revit?
1. Open the project view that contains the section (callout) or scope box to rotate.
2. Select the section (callout) or scope box.
3. Click Modify
4. Rotate the view.
How do I exit a selection box in Revit?
To reset your view, go to the Properties Menu and under the Extents tab. There should be a check box by the Selection box option which turns your Selection Box on and off. Enjoy the video!