Contents
How do you view a scope box in Revit?
1. In a plan view, click View tab Create panel (Scope Box).
2. On the Options Bar, enter a name and specify a height for the scope box, if desired.
3. To draw a scope box, click in the upper left-hand corner to start the box.
4. If desired, open a 3D view to further adjust the size and position of the scope boxes.
How do you rotate a scope box in Revit?
1. Open the project view that contains the section (callout) or scope box to rotate.
2. Select the section (callout) or scope box.
3. Click Modify
4. Rotate the view.
Which elements can a scope box can control?
Scope boxes are used to control the extents of elements like grids, levels and reference planes. Each of these elements can be assigned to a specific scope box, limiting the 3D extents to the dashed green line limit.
How do you turn off Scope box in Revit?
1. Click Modify | Scope Boxes tab View panel Hide in View drop-down (Hide Elements).
2. Right-click a scope box, and click Hide in view Elements.
How do I assign a scope box to a view?
1. Open a view in which you can see the scope box.
2. Select the scope box.
3. On the Properties palette, for the Views Visible property, click Edit.
4. Locate the appropriate view row (for example, South Elevation), and find its value in the Override column.
5. Click OK.
What is the difference between Scope Box and section box in Revit?
However, once a scope box is created, it is going to be visible in the other view categories: sections, callouts, elevations and 3D views. In elevations and sections, the scope box is only going to be visible if it intersects the cut line. You can adjust the extents of the scope box in all view categories.5 sept. 2018
How do I create a scope box in Revit 2020?
1. In a plan view, click View tab Create panel (Scope Box).
2. On the Options Bar, enter a name and specify a height for the scope box, if desired.
3. To draw a scope box, click in the upper left-hand corner to start the box.
4. If desired, open a 3D view to further adjust the size and position of the scope boxes.
Why is my scope box greyed out in Revit?
There are some situations where the Scope Box property of a view is greyed out – so you cannot assign a Scope Box to the view. The answer may be to do with the Crop Boundary – and it may not be obvious, especially if the crop boundary is hidden.
Why is my crop view greyed out in Revit?
The ‘Reset Crop’ icon will now be greyed out – indicating the crop is no longer edited.9 nov. 2019
How do you make a Scope Box?
What is Section box in Revit?
In Revit®, the ‘Section Box’ command is used to clip the viewable portion of a 3D view. You can activate it simply by checking the Section Box entry in Properties – Extents. After enabling the section box, you can modify its extents using ‘drag’ controls in the 3D view.
How do you copy a scope box in Revit?
How do you crop a 3D view in Revit?
1. If the view is not cropped, On the View Control Bar, click (Crop View).
2. If the view is cropped, but the crop region is not visible, click (Show Crop Region) on the View Control Bar.
3. Resize the crop region as necessary by using the drag control or setting the size explicitly.
How do you change the crop view in Revit?
1. In a plan, elevation, or section view, select a crop region and click Edit Modify |
2. Use the tools on the Modify and Draw panels to edit the crop region as needed.
3. When you are finished, click Finish Edit Mode.
How do I enable a section box in Revit?
1. Enable the section box in a 3D view.
2. Open an associated view such as a plan view or an elevation view.
3. In the Project Browser, right-click the 3D view name, and click Show Section Box.
4. In the associated view, drag the blue arrow controls to resize the section box.