Contents
How do you cut out topography in Revit?
1. Open a site plan or 3D view.
2. Click Site tab Modify Site panel (Split Surface).
3. In the drawing area, select the toposurface to split.
4. Click Modify | Split Surface tab Draw panel (Pick Lines), or use other sketch tools to split the toposurface.
How do you cut and fill topography in Revit?
Report the cut and fill volumes of the graded region with a topography schedule. On the View tab, create a schedule and select the topography category. Add the cut and fill parameters to the schedule. Change the phase filter of the schedule so it does not display calculations for the existing site.22 juil. 2021
How do you edit topography in Revit?
How do you excavate in Revit?
Where are Revit site settings?
To access the Site Settings dialog, click the dialog launcher on the Model Sight panel. In the Site Settings dialog, you can modify the contour line display by adding contours. To do this, click Insert. Change the Start, Stop, and Increments values and select the desired Range Type and Subcategory.21 jan. 2021
How do you make topography thicker in Revit?
To create the thickness you either create a copy of the 3D view or work in the default 3D view. 2. You then switch on the section box in view properties dialog. slightly into your 3D surface until you see you Topography Cut pattern appears.4 jui. 2020
How is cut and fill calculated?
The cut or fill depth for each cell is found by subtracting the average existing level of the cell from the average proposed level. If the resultant depth is positive then this is a fill cell, while a negative value indicates a cut cell.6 sept. 2017
How does Revit calculate earthwork?
How does Revit calculate cut and fill?
1. Create a toposurface.
2. In the site plan view, select the toposurface.
3. On the Properties palette, set Phase Created to a phase earlier than the view’s phase.
4. Optional.
5. Click (Finish Surface).
6. Select the toposurface copy.
How do I change the color of topography in Revit?
To view or change toposurface or subregion properties, open a 3D view or a site plan view, and then click Site tab Model Site panel (Toposurface). Select the surface material from the list. You can create your own toposurface material. Topographical surfaces do not support materials with surface patterns.7 fév. 2017
How do you import topography into Revit?
1. Open a 3D view.
2. Click Massing & Site tab Model Site panel (Toposurface).
3. On the Modify | Edit Surface tab, click Tools panel Create From Import drop-down (Select Import Instance).
4. Select the imported 3D contour data in the drawing area.
5. Select the layers to which you want to apply elevation points, and click OK.
How do you hide topographic lines in Revit?
1. Go to Visibility Graphics > Contour Lines.
2. Uncheck Primary Contours and Secondary Contours.
What is cut and fill excavation?
Cut and fill excavation is also known as excavation and embankment. It’s a process where excavators move and place volumes of material to create optimal terrain for a road, railway or canal. … Fill: Earth that is brought into an area is considered “fill” or embankment earth.19 mai 2020
How do you calculate fill area?
1. Measure the length, width and depth of the area you want to fill with dirt.
2. Calculate the volume of dirt needed to fill the area you measured by multiplying length (120 inches) by width (60 inches) by depth (30 inches).
3. Convert cubic inches to cubic yards by dividing by 46,656 cubic inches.
How do you change site settings in Revit?
Use the Site Settings dialog to view or change site settings. To change site settings properties, click Massing & Site tab Model Site panel . Displays contour lines. If you clear the check box, custom contour lines still display in the drawing area.22 juil. 2021