How to edit 3d solid in autocad?

1. EXTRUDE (Command)
2. OFFSETEDGE (Command)
3. PRESSPULL (Command)
4. SLICE (Command)
5. SOLIDEDIT (Command)

People ask also, how do you edit a 3D solid?

1. Click Solids > Solid Editing > Color faces (or enter EditSolid, choose the Face option, then the Color option).
2. In the graphics area, specify one or more faces of solid objects and press Enter to complete the selection.

Subsequently, how do you trim a 3D solid in Autocad?

1. Click Home tab Solid Editing panel Slice. Find.
2. Select the 3D solid or surface objects to slice. Press Enter.
3. Specify two points to define the cutting plane.
4. Specify which side of the sliced object to retain, or enter b (Both) to retain both sides.

Likewise, how do I expand a 3D solid in Autocad?

1. Click Home tab Modify panel Extend .
2. At the prompt, enter o (mOde) and at the next prompt, enter s (Standard).
3. Select the boundary edge for extending (1).
4. Enter e (Edge) and at the next prompt, enter e (Extend).
5. Enter p (Project).
6. Enter u (UCS).
7. Select the object to extend (2).

Best answer for this question, how do I edit a shape in Autocad? Double-click the opening you want to change. On the Properties palette, click the Design tab, expand Basic, and expand General. Select a shape. To specify a custom shape, select Custom for Shape, and select the profile that provides the geometry of the shape for Profile.Select a point in the drawing, right-click Properties. On the Design tab expand the Autodesk Civil 3D section to display the point properties for Display, Information, Coordinate, and Labeling. To change a property, click in the cell and enter a new value or select a value from the list.

What is solid editing in AutoCAD?

The Solidedit Command Solidedit issues a command line prompt that divides its editing options into. Figure 1. Each face on this 3D solid has a color that is different from its neighboring faces. This was done by the Color option of AutoCAD’s new Solidedit command.

How do you trim extruded objects in AutoCAD?

1. Select the space to be trimmed, right-click, and click AEC Modify Tools Trim .
2. Specify a start point for the trim line.
3. Specify an endpoint for the trim line.
4. Select the side of the space to be trimmed.

How do you cut a surface in AutoCAD?

1. Click Surface tab Create panel Trim. Find.
2. Select the surface and press Enter.
3. Select the cutting curves and press Enter.
4. Select the surface areas to remove and press Enter. The selected areas are remove d.

How do I cut a shape in AutoCAD?

1. Click Home tab Modify panel Trim. Find.
2. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges.
3. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.

How do you edit extrudes?

1. In the drawing area, select the extrusion.
2. If you are in the project environment:
3. Click Modify | Extrusion tab Mode panel (Edit Extrusion).
4. If desired, modify the extrusion profile.
5. On the Properties palette, change the visibility, material, or subcategory of the extrusion, if desired.

How do I edit a sweep in AutoCAD?

On the Modify | Sweep tab Sweep panel, click (Select Profile). On the Sweep panel, use the tools that display to select a new sweep profile or change the sweep profile location. To edit the existing profile, on the Sweep panel, click (Edit Profile), and use the tools on the Modify | Sweep > Edit Profile tab.

How do I change the extrude height in AutoCAD?

Select the extruded 3D space for which you want to change the height of a surface, and click the Edit Surfaces grip. Select the Surface Height grip for the surface you want to edit, and drag it to the desired height or enter a value for the height.

How do I edit lines in AutoCAD?

1. In a drawing, right-click a schematic line and click Schematic Line Edit Attach to Component.
2. Select the schematic line that you want to attach.
3. Select the component to which you want to attach.
4. Press ENTER.

How do I make different shaped viewports in AutoCAD?

1. Click the Clip tool in the Layout tab’s Layout Viewports panel.
2. At the Select viewport to clip: prompt, click the viewport border.
3. At the Select clipping object or [Polygonal] : prompt, press ↵.
4. Turn off Object Snap, and draw the outline shown in the top portion.

How do you edit a viewport in Civil 3D?

1. Click Quick Access toolbar >> Open. Navigate to the local TemplatePlan Production folder.
2. Select the top viewport. Right-click.
3. On the Properties palette, scroll down to the Viewport category.
4. Double-click the cell next to Viewport Type.
5. Close Civil 3D(Imperial) Plan and Profile.