Contents
What is the use of donut command in AutoCAD?
The donut command in AutoCAD is used to create a donut-shaped object, which can be used in different ways in a drawing, like the wheel of four-wheelers, design circuits, etc.
What is the donut command?
A donut consists of two arc polylines that are joined end-to-end to create a circular shape. The width of the polylines is determined by the specified inside and outside diameters. … A donut is drawn at each point specified until you press Enter to end the command.
What is difference between circle and donut command?
Creates a filled circle or a wide ring. A donut consists of two arc polylines that are joined end-to-end to create a circular shape. The width of the polylines is determined by the specified inside and outside diameters. If you specify an inside diameter of 0, the donut is a filled circle.
Which Textalign setting allows you to set up evenly aligned text to a defined spacing in a drawing?
Q43. The Text Align (TEXTALIGN) command does more than just align text vertically or horizontally. Which TEXTALIGN setting allows you to set up evenly aligned text to a defined spacing in a drawing? Q44.
How do I move around in Autodesk?
Click Zoom or press F3. Use the arrow cursor to click and drag the view to the desired scale. Dragging down increases view scale; dragging up decreases view scale. Release the mouse button when the image is at the required magnification.
What is ID command in Autocad?
Displays the UCS coordinate values of a specified location. ID lists the X, Y, and Z values of the specified point and stores the coordinate of the specified point as the last point. You can reference the last point by entering @ at the next prompt that requests a point.
What is Helix command?
Use a helix as a sweep path for the SWEEP command to create springs, threads, and circular stairways. … During a drawing session, the default value for the base radius is always the previously entered base radius value for any solid primitive or helix. Diameter (base) Specifies the diameter of the base of the helix.
What is Nurbs in AutoCAD?
NURBS stands for nonuniform rational B-spline curves. In AutoCAD, you can treat a NURBS surface as a 3D spline with fit points. … They also enable better control of the surface; and by using different densities of fit points on AutoCAD 3D surfaces, you can control the degree of precision of the surface.
What is Palette in AutoCAD?
AutoCAD Tool Palettes can be used to create libraries of frequently used blocks, dynamic blocks, tools and commands for easy access. … Once added to the palette, these blocks can be inserted in another drawing either with drag and drop or by double-clicking on a specific block in the tool palette.
What is sweep command in AutoCAD?
The 2D sub-object or object is swept along an open or closed path to create a 3D surface or solid using sweep command. The object enclosing the area is swept to create a 3D solid or surface, but an open-ended object is swept to create only a 3D surface.
What is the default UCS in 3D AutoCAD?
The UCS is a moveable Cartesian coordinate system that establishes the XY work plane, horizontal and vertical directions, axes of rotation, and other useful geometric references. … Note: By default, the Coordinates panel is hidden in the Drafting & Annotation workspace.
What is Ellipse command in AutoCAD?
The AutoCAD ELlipse command provides a straightforward way to draw an ellipse: You specify the two endpoints of one of its axes and then specify an endpoint on the other axis. … You can then either enter the length of the other axis or specify that a rotation around the major axis defines the ellipse.
What is the command for repeat?
To repeat something simple, such as a paste operation, press Ctrl+Y or F4 (If F4 doesn’t seem to work, you may need to press the F-Lock key or Fn Key, then F4). If you prefer to use the mouse, click Repeat on the Quick Access Toolbar.
What is the difference between plot and print commands?
What is the Difference Between Printing and Plotting? The terms printing and plotting can be used interchangeably for CAD output. Historically, printers would generate text only, and plotters would generate vector graphics. … The process of generating physical models in plastic and metal is called 3D printing.
Is a donut a circle?
The round shape was first developed so that the donut would not have any corners, so that, when the donut is filled, there are no weak points for the filling to spurt out from.