Contents
Youtube video link: https://m.youtube.com/watch?v=TwpEw1voNNo
1. Type MVIEW at the command line.
2. Type S for shadeplot.
3. Type H for hidden.
4. Select the viewport.
1. At the Command prompt, enter HLSETTINGS.
2. In the Hidden Line Settings dialog box, change the settings and click OK.
A hidden line, also known as a hidden object line is a medium weight line, made of short dashes about 1/8” long with 1/16”gaps, to show edges, surfaces and corners which cannot be seen. Sometimes they are used to make a drawing easier to understand. Often they are omitted in an isometric view.
Use the Hidden Line Projection command to create quick 2D elevations and sections. After you create an elevation or section hidden line projection, you can hatch or shade the cut areas. You can also use hidden line projections to create detail drawings.16 fév. 2021
Causes: The linetype scale is too large or too small for the size of the affected object. There is a problem with the display driver on the system. The linetype property of the line itself is Continuous, while its layer is assigned the desired linetype.25 juil. 2021
1. Select the viewport in which you want to show hidden lines.
2. Click Window menu > Properties Inspector.
3. On the Properties Inspector, Misc area, Shade Plot list, select As Displayed.
Why can’t I see dashed lines in AutoCAD?
Why can’t I see dashed lines in AutoCAD? Most likely your line type scale is set too low. Select your line you want dashed and open the properties on it.
Hidden lines in a drawing represent the edges where surfaces meet but are not directly visible. Hidden lines are omitted from pictorial drawings unless they are needed to make the drawing clear. Figure 3.46 shows a case in which hidden lines are needed because a projecting part cannot be clearly shown without them.6 avr. 2018
Hidden details are shown by a series of dashes making up a broken line. It is normal practice that you place a dash at the beginning of the hidden line and another at the end where it meets an intersecting line.
A drafter—in deciding whether a line in a view should be represented as hidden or as visible—relies on the fact that in third-angle projection the near side of the object is near the adjacent view, but in first-angle projection the near side of the object is remote from the adjacent view.
Answer: dashes- It is standard practice to use dashes to represent any line of an object that is hidden from view.19 mai 2021
What are alphabet lines?
The Alphabet of Lines is a list of line symbols that engineers use in technical drawings to communicate specific shapes, sizes or surfaces. In the Alphabet of Lines, thick, dark lines represent the outline of an object, showing its visible surfaces and edges.12 jui. 2020
What are types of lines?
There are many types of lines: thick, thin, horizontal, vertical, zigzag, diagonal, curly, curved, spiral, etc. and are often very expressive.