Contents
1. Select a layout viewport.
2. Double-click the viewport border to display the Properties palette.
3. On the Properties palette, click Shade Plot.
4. In the Shade Plot drop-down list, select Hidden.
5. Click OK to plot the drawing.
1. At the Command prompt, enter HLSETTINGS.
2. In the Hidden Line Settings dialog box, change the settings and click OK.
A hidden line projection tool is located with the Helper Tools in the Stock Tool Catalog. Alternatively, you can click Home tab Section & Elevation panel Hidden Line Projection. In a 3D view select one or more objects that you want to use to create your hidden line projection, and press Enter.16 fév. 2021
A hidden line, also known as a hidden object line is a medium weight line, made of short dashes about 1/8” long with 1/16”gaps, to show edges, surfaces and corners which cannot be seen. Sometimes they are used to make a drawing easier to understand. Often they are omitted in an isometric view.
1. Type MVIEW at the command line.
2. Type S for shadeplot.
3. Type H for hidden.
4. Select the viewport.
Why are my lines not dashed in AutoCAD?
Why can’t I see dashed lines in AutoCAD? Most likely your line type scale is set too low. Select your line you want dashed and open the properties on it.
Hidden lines in a drawing represent the edges where surfaces meet but are not directly visible. Hidden lines are omitted from pictorial drawings unless they are needed to make the drawing clear. Figure 3.46 shows a case in which hidden lines are needed because a projecting part cannot be clearly shown without them.6 avr. 2018
How do you draw a centerline in AutoCAD?
Hidden lines are used to show surfaces that are not directly visible. All surfaces must be shown in all views. If an edge or surface is blocked from view by another feature, it is drawn using a hidden line. Figures 4-11 and 4-12 show objects that require hidden lines in their orthographic views.10 mar. 2017
A drafter—in deciding whether a line in a view should be represented as hidden or as visible—relies on the fact that in third-angle projection the near side of the object is near the adjacent view, but in first-angle projection the near side of the object is remote from the adjacent view.
Hidden details are shown by a series of dashes making up a broken line. It is normal practice that you place a dash at the beginning of the hidden line and another at the end where it meets an intersecting line.
What is Msltscale?
MSLTSCALE = 1. To change a variable’s value, simply type it in at the command line and enter a new value when prompted. These values are saved in the drawing, so it’s worth getting them right in your template file.
How do I show dashed lines in AutoCAD layout?
How do you hide a viewport in AutoCAD?
1. From Layout, enter mview on the command line.
2. At the prompt, enter off.
3. Select the viewport to turn off and press ENTER.
How do I fix dashed lines in AutoCAD?
1. Step 1: Check Your PSLTSCALE and LTSCALE. Your first step should be to troubleshoot your drawing for issues with LTSCALE and PSLTSCALE.
2. Step 2: Set Your Measurement Units Correctly and Reload Your Linetypes.
3. Step 3: Purge Unused Linetypes.