Contents
What is a work plane in Inventor?
In a part, a work plane is an infinite construction plane that is parametrically attached to a feature. In an assembly, a work plane is constrained relative to an existing component. Use work planes when creating axes, sketch planes, termination planes, or to position cross-sectional views or cutting planes.14 avr. 2021
How do you make a plane in Inventor 2021?
1. On the ribbon, click 3D Model tab Work Features panel . Then, choose the type of plane you want to create and select the appropriate geometry: Plane. Creates a construction plane through selected objects.
2. If applicable, click the check mark in the edit box to accept the preview and create the plane.
How do you make an offset plane in Inventor?
How do you place a plane on a cylinder in Inventor?
How do you move the plane in Inventor?
1. On the ribbon, click 3D Model tab Work Features panel Plane . Select appropriate vertices, edges, or faces to define a work plane, or select the desired option from the Plane drop-down menu.
2. Adjust the size and position of the work plane:
What does work plane mean?
A work plane is a modeling feature that defines the location of a plane in 3-dimensional (3D) space. … It can be offset from an existing work plane, or it can reference 3D geometry. Using a work plane, you define the geometry, dimensions, constraints, and profiles that make up the part model.30 avr. 2018
Who Found airplane?
Wright brothersAlberto Santos-DumontE. Lilian ToddVictor Tatin
What is Workplane height?
For office (desk) work the height of the workplane usually is assumed at 0.85 m (33.5 in) in Europe, and at 0.76 m (30 in) in the USA, and for circulation areas (halls, train platforms etc.) at 0.15 – 0.2 m (6 – 8 in).
How was Airplanes invented?
Most airplanes are flown by a pilot on board the aircraft, but some are designed to be remotely or computer-controlled such as drones. The Wright brothers invented and flew the first airplane in 1903, recognized as “the first sustained and controlled heavier-than-air powered flight”.
How do you offset a plane?
To create an Offset Plane, select a planar face or plane that you want to offset from and specify the offset distance. Select the Flip offset button if you need the plane to be created in the opposite direction.10 nov. 2019
How do you offset a plane on shape?
How do you make a tangent plane in Inventor?
Select the edge of the XY Plane and the tangent face of the curved surface to create the work plane. Start a new sketch on the work plane. Start the Project Geometry command. Select the two edges of the mounting tab as shown in the following image to project them to the sketch plane.12 fév. 2014
Who invented cylinder shape?
Archimedes
Can you rotate a plane in Inventor?
By basing this Work Plane on a relative angle, it (and any dependent planes and features) can now be rotated – simply double- click on the Work Plane, change the angle accordingly (see Figure 9), and then select the Update button on the Quick Access toolbar.