Contents
How do I delete holes in Inventor?
In order to remove the hole, you have to stop what you are doing, and make the sketch visible. Then you have to edit the feature and while holding down shift and remove the point from the selection set.
How do I delete an extrusion in Inventor?
How do I delete an extrusion in Inventor? You can edit an existing feature and when the extrusion or other dialog box available select the profile button then holding down the Ctrl key select the profile you want to remove. You can then release the Ctrl key and select a new profile.
How do you use the Hole command in Inventor?
1. Click 3D Model tab Modify panel Hole .
2. Optional – check the panel menu to see if the options you want are active.
3. Specify a preset.
4. Specify the Placement.
5. Specify the Type.
6. Specify the hole Termination options:
7. Threads enables when the Tapped or Taper Tapped hole type is selected.
How do you make a concentric hole in Inventor?
To create concentric holes, place the hole center and click the model edge or curved face the hole is to be concentric with. Note: You can select a workplane edge, then a model edge or curved face to place a concentric hole center. Hole depth is measured from the workplane.14 avr. 2021
How do I delete a 3D object in Inventor?
Right-click and select Delete. In the Delete Features dialog box, specify which dependent features, sketches, or work features to delete or retain: For consumed sketches, surface features, and work features of selected features: To delete sketches and features consumed by the selected features automatically, click OK.12 fév. 2014
How do you delete a extrusion in Revit?
One way to delete this extrusion is to grab the shape handle in the floor plan view “Ref. Level” (the top or bottom one in this case) and then pull it down or up to create an error in Revit “can’t make extrusion.”. Of the two options ‘delete element(s)’ or ‘cancel’, select ‘delete element(s)’ and it does the trick.14 mai 2016
How do you delete a circular pattern in Inventor?
1. In the browser, select the sketch, right-click, and then select Edit Sketch.
2. Select the sketch pattern geometry to delete.
3. Right-click and select an option. The selection options are determined by selected geometry. Nonpattern geometry: Delete removes the selected geometry.
How do you make counterbore in Inventor?
How do you get screws in Inventor?
How do you dimension a hole in Inventor?
1. Right-click the hole feature and select Show Dimensions.
2. Double-click the hole dimension.
3. In the Hole Dimensions dialog box, modify the values. Note: If the hole does not contain the associated feature, values are unavailable. Hole Diameter. Sets the value for the diameter of the hole.
4. Click OK.
How do you delete geometry in Inventor?
1. In the browser, select the sketch, right-click, and then select Edit Sketch.
2. Select the sketch pattern geometry to delete.
3. Right-click and select an option. The selection options are determined by selected geometry. Nonpattern geometry: Delete removes the selected geometry.
How do I delete unwanted lines in Autocad?
Solution: Select objects in a drawing (use CTRL-A to select everything) and then type OVERKILL on the command line. Click OK on the Delete Duplicate Objects dialog window, adjusting settings as desired (the default options are usually sufficient). Overkill deletes information that is overlaying other items.27 mar. 2019
How do I delete a 3D object in Autocad?
Click Home tab Modify panel Erase. Find. At the Select Objects prompt, use a selection method to select the objects to be erased or enter an option: Enter L (Last) to erase the last object drawn.
How do you edit extrusions in Revit?
1. In the drawing area, select the extrusion.
2. If you are in the project environment:
3. Click Modify | Extrusion tab Mode panel (Edit Extrusion).
4. If desired, modify the extrusion profile.
5. On the Properties palette, change the visibility, material, or subcategory of the extrusion, if desired.
How do you select a void in Revit?
Select Cut, and then select the void and the elements that should be cut by the void. Solid forms and void forms can be toggled if they are not cutting or being cut by any other form.21 jan. 2021