Contents
How do you round a parameter in Inventor?
How do I use circular patterns in Autodesk?
1. In a sketch, click Sketch tab Pattern panel, click Circular .
2. In the graphics window, select the geometry to pattern.
3. In the Circular Pattern dialog box, click the selection tool under Axis and then select a point, vertex, or work axis to define as the pattern axis.
How do you change the bend radius in Inventor?
On the Notes and Leaders tab, select Bend Note Settings. If needed, edit the default bend note text in the edit field: Click Bend Direction, Bend Angle, Bend Radius, or kFactor in the Values and Symbols section to insert the corresponding property in the edit field.14 avr. 2021
How do you use the trim tool in Autodesk Inventor?
1. In a 2D sketch, click Sketch tab Modify panel Trim .
2. In the graphics window, press the left mouse button and move the cursor over the sketch. Inventor trims all lines and curves that the cursor passes over.
3. To quit, right-click and choose Done, press Esc, or select another command.
How do I make a pattern in Inventor?
1. In a sketch, click Sketch tab Pattern panel, click Circular .
2. In the graphics window, select the geometry to pattern.
3. In the Circular Pattern dialog box, click the selection tool under Axis and then select a point, vertex, or work axis to define as the pattern axis.
How do I edit a pattern in Inventor?
Right-click a pattern element in the graphics window and choose Edit Pattern. Change any values in the Rectangular Pattern or Circular Pattern dialog box and click OK. Double-click a pattern dimension in the graphics window to change it.14 avr. 2021
How do you make a circular pattern?
1. Create one or more features to replicate.
2. Click Circular Pattern (Features toolbar) or Insert > Pattern/Mirror > Circular Pattern.
3. Set the PropertyManager options.
4. Click .
How do you cut surfaces in Inventor?
1. click 3D Model tab Surface panel Trim .
2. In the Trim dialog box, select the Cutting tool and then click the geometry to use as the cutting tool:
3. Click the Remove to indicate the areas to remove.
How do you trim a solid in Inventor?
1. Click 3D Model tab Modify panel Split .
2. In the Split dialog box, click Trim Solid .
3. Using the Split Tool selector, click a work plane, 2D sketch, or surface body to use to trim the solid.
4. Under Remove, select which side to remove.
5. Click OK.
What is the shortcut key of TRIM command?
What is the shortcut key for TRIM command? You can toggle the command between trim and extend by holding down the ‘Shift’ key.
How do I remove a rectangular pattern in Inventor?
1. In the browser, select the sketch, right-click, and then select Edit Sketch.
2. Select the sketch pattern geometry to delete.
3. Right-click and select an option. The selection options are determined by selected geometry. Nonpattern geometry: Delete removes the selected geometry.
How do you use the rectangular pattern in Inventor 2020?
What is a rectangular pattern?
A drainage pattern in which the main streams and their tributaries display many right-angle bends and exhibit sections of approx. the same length; it is indicative of streams following prominent fault or joint systems that break the rocks into rectangular blocks.
How do I delete a constraint in Inventor?
What is a circular pattern?
A circular pattern is an radial arrayof objects around a. Center point in a sketch. Axis in a part or assembly. Bolt pattern on automobile wheel would be an example.17 oct. 2011