Autocad body to 3d solid?

1. Create a layer to place the body object on and isolate that layer.
2. Type the command FACETERSMOOTHLEV and set the variable to 0 (zero).
3. Select the body object and type MESHSMOOTH.
4. Select the mesh object and type EXPLODE.
5. Type REGION and select all 3D faces.
6. Type SURFSCULPT and select all regions.

Correspondingly, how do you make a 3D solid surface in AutoCAD?

1. Click Surface tab Edit panel Sculpt. Find.
2. Select one or more surfaces that completely enclose a volume. There must be no gaps between the surfaces. A 3D solid object is created.

Frequent question, how do you turn an object into a solid in AutoCAD?

1. Click Mesh tab Convert Mesh panel Convert Options drop-down.
2. Specify one of the following conversion options: Smooth, optimized.
3. Click Mesh Modeling tab Convert Mesh panel Convert to Solid.
4. Select a mesh object that has no gaps or intersecting faces.

Similarly, how do I convert Nurbs to solid in AutoCAD?

1. Enter THICKEN on the command line.
2. Select the surface.
3. Enter a thickness value for the selected surface on the command line.
4. When prompted, choose whether to erase the defining surface or not.

You asked, how do you convert polyline to 3D solid?

1. In the ‘3D Modeling Workspace’ select the ‘Home’ tab and in the ‘Modeling’ panel select either ‘Extrude’, ‘Polysolid’ or ‘Presspull’.
2. Select the polyline and hit ‘Enter’ and either ‘Pull’ it up to the height or type in the command line the desired height then hit ‘Enter’.

1. Enter CONVTOSURFACE on the command line.
2. Select the face that you want to convert.
3. Enter THICKEN on the command line.
4. Select the surface.
5. Enter a thickness value for the selected surface on the command line.
6. When prompted, choose whether or not to erase the defining surface.

How do you fill a 3D object in Autocad?

1. First set the layer that you want to use for your solid fill.
2. On the Home tab in the Draw panel, click Hatch.
3. In the Pattern panel, choose Solid.
4. If you have one closed area, you can just click inside it to pick an internal point.
5. Press Enter to end the HATCH command.

How do you make a solid extrude?

How do you convert surface model to solid model in Inventor?

Now, to the important part – getting the surface converted to a solid body. One of the ways of doing that is using the Thicken / Offset tool. Select all faces (more options in the More tab), select the thickness and hit OK. Now because your surface has a thickness, it becomes a solid, as it now has some volume.

How do you make a hollow cone in AutoCAD?

How do you turn a surface into a solid?

To convert a boundary surface into a solid, click Insert > Surface > Boundary Surface, and in Options and Preview, click Create solid. To convert a trim-surface feature into a solid, click Insert > Surface > Trim Surface and in Surface Split Options, click Create solid.

How do I change a wireframe to a solid in AutoCAD?

1. Click View tab User Interface panel. Find.
2. In the Options dialog box, Display tab, under Display Performance, click or clear Apply Solid Fill.
3. To display your changes, click View menu Regen.

How do I change my surface to region?

How do you make a polyline solid?

edit button. In the Convert Polyline dialog, select 3D Solid Hole option and click OK. In X13 and prior versions, select Polyline Solid instead, then click OK. In X13 and prior versions, on the General panel of the Polyline Solid Specification dialog, check the Hole in Polyline Solid box, then click OK.

How do you change to 3D in AutoCAD?

Click the “cube” icon at the top right of the canvas and then drag the mouse until the top, right and front sides of the cube are visible. This changes the viewpoint from 2-D to 3-D, allowing you to see the three-dimensionality of the 3-D form that you’ll create from the 2-D model.

How do you extrude a polyline in AutoCAD?

Start the command again, select the object you want to extrude, and then press ENTER. Then, right-click and choose the Path option. The program prompts you to select the extrusion path. Click to select the object that represents the path along which you want to extrude the object.