Autocad civil 3d join feature lines?

1. Click Modify tab Edit Geometry panel Join Find.
2. Select the feature line you want to join other lines to.
3. Select the joining object or enter Multiple to make a selection of multiple feature lines, polylines, or 3D polylines.

Similarly, how do you join multiple lines in Civil 3D?

1. Click Home tab Modify panel Edit Polyline. Find.
2. Select a polyline, spline, line, or arc to edit.
3. Enter j (Join).
4. Select one or more polylines, splines, lines, or arcs that are located end to end.
5. Press Enter to end the command.

Moreover, can you fillet feature lines? Fillets a feature line, survey figure, or 3D polyline. This command can be used to round the corners of feature lines. The fillet can span multiple segments and can be used to join two connecting feature lines.

People ask also, can you break feature lines? Use the Break command to break a feature line into two feature lines. The prompts for this command are similar to the AutoCAD Break command.

Quick Answer, how do I create a feature line alignment? Select a site in the list or click to select a site in the drawing. Select the option from the list to create the feature line outside of a site. Note: The feature line can not be created in the same site as the alignment. If the alignment is in a site, that site will not be available in the site list.

1. Click Modify menu > Join Entities, or click Join Entities on the AM:Modify toolbar.
2. Select the first line, and then select the second line.
3. Start the List command, and when prompted to select objects, use a crossing window to select the whole line.
4. Press ENTER.

Why won’t my lines join in AutoCAD?

Causes: Objects have gaps or do not have connecting points because of different elevations. Use the UNITS command and increase the precision to maximum. Examining the lines, the Properties palette will show Start Z / End Z or Elevation values, potentially of a minute amount.

How do you fillet two feature lines?

1. Select the corner to fillet.
2. Enter Radius to specify a different radius.
3. Enter All to fillet all corners.
4. Enter Join to join a connecting feature line and then select the feature line.

What occurs if two feature lines occupy the same site and intersect?

This means that Feature Lines will interact with other Feature Lines that are included in the same Site. (If you don’t want them to interact with each other put them in different Sites.) So, if you create two Feature Lines that cross each other a Split Point will be created at the intersecting location.

How do you break a feature line in Civil 3D?

1. Click Modify tab Edit Geometry panel Break Find.
2. Select the feature line to break:
3. Specify the second break point. Note: if you enter the @ character at the prompt for the second break point, it uses the first point location, creating a break without a gap.

Can you join two feature lines?

Use the Join command to join connecting feature lines, polylines, or 3D polylines into one feature line or survey figure. Select the two lines. They are joined if they lie within the tolerance distance set in JoinFeatures command settings. Click Modify tab Edit Geometry panel Join Find.

Can you offset a feature line?

Creates a new feature line from an offset and difference in elevation from a selected feature line, survey figure, polyline, or 3D polyline. Specify the offset distance, the side, and elevational difference or absolute elevation.

What are feature lines in Civil 3D?

So that’s what Feature Lines do, they represent edges or linear objects in a three dimensional form in your drawing model. In fact, if you’re familiar with AutoCAD 3D polylines in a fundamental sense they’re very similar.

How do I create a profile view from a feature line?

How do you convert a feature line to a polyline?

How do you create a polyline alignment in Civil 3D?

To create an alignment from that polyline, on the ribbon, Home tab, Create Design panel, select Alignment > Create Alignment from Objects. The command line prompts you to select a line, arc or a polyline, or even objects that are lines, arcs, or polylines contained within an xref.