Autocad plant 3d flexible hose?

How do I change the pipe spec on a 3D plant?

1. In the drawing area, select one or more pipe or fitting objects.
2. Right-click in the model.
3. In the shortcut menu, click Properties.
4. If you want to change the pipe spec do the following: In the Properties palette, click Plant 3D group Spec. In the Spec list, click a pipe spec.

How do you make a hose line in AutoCAD?

1. In the Piping workspace, click Home tab Build panel Tools drop-down Tools .
2. Select a flexible pipe tool from the Piping tool palette.
3. On the Properties palette, under General, specify a system.
4. Under Dimensions, specify a routing preference.
5. Select a nominal size for each pipe connector.

How do you move the pipe in a 3D plant?

1. In the drawing area, click an elbow to select it. Alignment lines display on connected pipe.
2. Click a move part grip.
3. Specify a location to move the elbow to (for example: to the left). You can move the elbow only in a direction that is perpendicular to an alignment line.

How do you make a pipe support in Plant 3D?

1. Select the block.
2. Add a port (Supports do have only one port). The port should be at the middle of the support. The direction is aligned to the pipe onto the support will be added later.
3. Exit the command.

How do I add a spec to a 3d plant in AutoCAD?

1. In File menu, click New Create Spec.
2. In the Create Spec dialog box, under Spec Name, click the [] button and browse to the folder where you want to save the spec file. …
3. In the Spec Description box, enter a description.
4. Optional.
5. Click Create.

How do you add pipe size to a pipe in Civil 3d?

How do you make a 3d tube in AutoCAD?

How do you draw a flexible line in AutoCAD?

1. Click Home tab Draw panel Polyline. Find.
2. Specify the start point of the polyline segment.
3. Specify the endpoint of the polyline segment.
4. Specify additional polyline segments as needed.
5. Press Enter to end, or enter c to close the polyline.

How do you draw a curved pipe in AutoCAD?

1. On the Network Layout Tools toolbar, click Pipes Only or Pipes and Structures.
2. If you clicked Pipes and Structures mode, specify the insertion point for the structure.
3. Enter c (curve), and press Enter.
4. Specify the second point of the curve.
5. Specify the end point for the curved pipe.
6. Press Enter to end the command.

How do you move long distance with plants?

1. Prep your plants. A few weeks ahead of the move, rid your plants of dead leaves and branches and give them a good prune.
2. Re-pot in plastic.
3. Watch the temperature.
4. Give them the right amount of water.
5. Know the law.
6. Don’t rely on a moving company.
7. Ship them.
8. Keep a cutting.

How do you connect two pipes in plant 3d?

1. At the command prompt, enter plantconnectjoint.
2. In the drawing area, select a part with an open port.
3. Select a second part that has an open part at the same location. The disconnect glyph no longer displays.

Can I move a plant I just planted?

Moving a plant means breaking roots – usually the fine root hairs that do the job of exploring the soil to find moisture. Firstly, you should water the plant before you move it. Then dig your new hole and fill that with water, right to the top; then wait for it to drain away.

How do you make a 3D nozzle for a plant?

1. After creating or modifying custom equipment, in the model, click a piece of equipment to select it.
2. Click the Add Nozzle grip .
3. In the dialog box, do the following:
4. When you are finished, click Close.
5. Repeat these steps to add other nozzles as needed.

Where is spec editor in Plant 3D?

How do you create a plant in AutoCAD?

1. Open the Insert dialog box and click on the Browse button.
2. Browse through the collection until you find the block of trees or plants that you want to insert.
3. Use the dialog box settings in the same way you would for a block within your drawing.
4. The last step is very important.