Check the units of the drawing are set correctly (enter the UNITS command). The units may have been changed from when the drawing was originally created. Check objects for Elevation or Start Z / End Z values (via Properties palette). Dimensioning from 2D to 3D space can throw off values.
Quick Answer, why are my dimensions wrong in paper space? I found that the cause is the system variable dimassoc. If it is set to “1” it will give the dimension of distance on the paper, if set to “2” it will give the acutal model space dimension for the part.
Correspondingly, how do I make my viewport layout fit? A viewport scale will automatically change to fit the entire drawing (zoom extents) if you double-click on the viewport after a UCS is changed.
Also know, how do I fix dimensions in AutoCAD?
- 1) Click on the ‘Annotation drop-down’ arrow in the ‘Home’ tab.
- 2) Click on the ‘Dimension style’ (second icon) from all options.
- 3) Now click on the ‘Modify’ and one another dialogue box will open.
- 4) From this dialogue box, you can edit arrows & symbols, text, lines, units, etc.
Beside above, how do I reset dimension scale in Autocad?
- Do one of the following:
- In the Dimension Style Manager, Styles list, select the style you want to change.
- Click Modify.
- In Modify Dimension Style dialog box, Fit tab, under Scale for Dimension Features:
- Click OK.
- Click Close to exit the Dimension Style Manager.
Contents
How do you find the exact dimension in Autocad?
In the drawing area, select the dimensions you want to mark. The Power Dimensioning Ribbon Contextual Tab displays. Click Power Dimensioning tab Representation panel Theoretically Exact. Press ESC .
How do you scale measurements in paper space?
Go to Dimension Style Manager by typing DIMSTYLE in the command line, or clicking on the dimension style icon. Select the dimension style you will be using, and click Modify. In the Fit tab, set the Dimension Scale to 1. In the Primary Units tab, set the Measurement Scale to 1.
How do you dimension a paper space in Autocad?
- Click Home tab Annotation panel Dimension Style.
- In the Dimension Style Manager, select the style you want to change.
- In Modify Dimension Style dialog box, Fit tab, under Scale for Dimension Features, select Scale Dimension to Layout (Paper space).
How do I change the scale of paper space in Autocad?
To set a scale in a Paper Space viewport, click within the viewport to make it active. Select No from the Display Locked menu in the Properties panel. The viewport will be unlocked. Center your view in the viewport, and make sure it’s set to a 1:1 scale.
Why is my viewport scale not accurate?
Make sure your MEASUREMENT System Variable is set to 0 (Imperial) Make sure you are using 1″ (inch) as your unit and not 1′ (foot). (if you were then check your UNITS set to Inches) and also you will have to scale everything up a factor of 12. — Tracy W.
How do you scale viewports in AutoCAD?
- Click the Model tab.
- Click a viewport to make it current.
- Choose View > Zoom > Zoom.
- Type the zoom scale factor relative to paper space by appending the suffix xp to the scale factor, and then press Enter.
How do I fit a viewport to a page in AutoCAD?
In the Page Setup Manager, Page Setups area, select the page setup that you want to modify. Click Modify. In the Page Setup dialog box, Under Plot Scale, select Fit to Paper. Note: If the Plot Area is set to Layout, you cannot select the Fit to Paper option.
How do you calibrate dimensions in AutoCAD?
- Click Home tab Annotation panel Dimension Style.
- In the Dimension Style Manager, select the style you want to change.
- In Modify Dimension Style dialog box, Fit tab, under Scale for Dimension Features, enter a value for the overall scale.
- Click OK.
How do I fix Reassociate in AutoCAD?
You can easily locate the affected dimensions and reassociate them with their respective geometry points by click-dragging them to snap to one or both geometry points again, if necessary. If you click one of the exclamation points, that brings up a menu with two choices, Reassociate and Delete.
How do I manually change dimensions in AutoCAD?
In the Dimension Style Manager, select the style you want to change. Click Modify. In the Modify Dimension Style dialog box, Fit tab, under Fine Tuning, select Place Text Manually When Dimensioning.