Autocad viewport won’t lock?

How do I lock a viewport in AutoCAD?

1. Right-Click. Select the Viewport. Right-click. Select Display Locked >> Yes.
2. Use the Properties Command. Select Modify >> Properties to open the Properties window. Select the Viewport. Change the Display Locked property of the viewport to Yes.

How do I lock a viewport in AutoCAD 2018?

Method #1: The most common method is also the easiest. Select the Viewport, then click on the Lock icon next to the Annotative Scale control in the Status Bar. Make sure the icon is blue and the shackle is in the locked position!

How do you freeze objects in viewport?

1. Double click on the viewport you want freeze the layer in.
2. Type in LAYFRZ.
3. Choose an object on the layer to be frozen.

How do I freeze a layout in AutoCAD?

1. Double-click within a layout viewport to make it current.
2. Click Home tab Layer panel Layer Properties.
3. In the Layer Properties Manager, select the layers to freeze or thaw.
4. Click the icon in the VP Freeze column for the selected layers.

How do I remove a viewport lock?

1. In layout view select the boundary of one Viewport.
2. Click the customization button at the bottom right of the screen.
3. Enable the viewport lock from the drop-up list.

How do you unlock viewport in AutoCAD 2021?

To unlock the layout viewport, select it while in paper space and change the Display Locked setting either in the Properties panel or from its shortcut menu. Drag the Move grip and click a new location. Alternatively, you can enter a distance or an x,y coordinate offset.

What is the purpose of the view cube?

The ViewCube is a navigation tool that is displayed when you are working in 2D model space or 3D visual style. With ViewCube, you can switch between standard and isometric views. The ViewCube is a persistent, clickable and draggable interface that you use to switch between standard and isometric views of your model.

What is OOPS command in AutoCAD?

OOPS restores objects erased by the last ERASE command. You can also use OOPS after BLOCK or WBLOCK because these commands have options that can erase the selected objects after creating a block. You cannot use OOPS to restore objects on a layer that has been removed with the PURGE command.

Why can I select a viewport in AutoCAD?

Make sure the layer has not been turned off or frozen: In the Layer Properties Manager, make sure the layer that contains the viewport geometry is not turned off or frozen. Go to the layout tab that contains the problem viewport. From the Properties palette, select the Quick Select button on the top right.

How do you freeze a layer in viewports except one?

1. Place your cursor through the Viewport where you want the layer to remain visible.
2. Enter the LAYER command.
3. Right-click on the layer you want frozen in the other Viewports, and select “VP Freeze in all Viewports”

What is the difference between freeze and off in AutoCAD?

When a layer is off, it is invisible and is not plotted, even if Plot is on. Thaws and freezes selected layers in all viewports. You can freeze layers to speed up zoom, pan, and many other operations; improve object selection performance; and reduce regeneration time for complex drawings.

How do I isolate layers in viewport?

1. Start the Layer Isolate command.
2. Enter S on the command line.
3. Verify that the current setting is Lock and Fade.
4. Enter O for Off.
5. Modify the Viewport setting.

How do you edit a viewport in AutoCAD?

1. Select the viewport.
2. Select Modify > Edit Viewport.
3. Click Design Layer and select the design layer to edit from the list.
4. Choose how the design layer will display.
5. If the viewport has been cropped, select Add Reference Crop Object to display the crop on the design layer.

What are the two options for creating splines in AutoCAD?

A 1-degree spline results in a line; there is no bend. A 2-degree spline results in a parabola; there can be only one bend. A 3-degree spline results in a cubic Bezier curve; there can be two bends.

How do you move a viewport in AutoCAD?

1. Double-click the viewport or scale area border (1).
2. In model space the Scale Area dialog box appears, in layout the View dialog box appears: Under border, click Move<. Choose OK.
3. Select the target position for the viewport (2).
4. Choose OK.