Cannot select a line in autocad?

1. The desired objects are within a viewport on a layout and the viewport is not active.
2. The layer of the objects are locked.
3. The edit mode of an xref is active.
4. The program is corrupted.

Correspondingly, how do you select a single line in AutoCAD? Select the objects you wish and don’t worry about whatever else selects. Once selected you can right click and choose Properties. In Properties you can narrow your choice in the top list to Lines or Polylines.

Also know, how do you fix a selection problem in AutoCAD?

1. Click the application menu (the A in the top-left corner) and select Options.
2. On the Selection tab, clear the Use Shift to add to selection option.
3. Choose OK to close the Options window.

Similarly, how do you turn on line selections in AutoCAD?

1. At the command line, enter SELECTIONCYCLING (System Variable).
2. Enter 2 to turn on the selection cycling display window. Enter 0 to turn it off.

Beside above, how do you select something in AutoCAD? You can select object using a line or a fence. When prompted to select objects, type [F] for fence and simply draw a dashed line across objects you want to select. All crossed and touched objects will be selected. If you made a mistake and selected an object you don’t need, don’t cancel command and start over.To open the Command line, type CommandLine anywhere in your CAD interface. Then press Enter. The Command line will reappear. You can also open the Command line by holding down the CTRL + 9 keys.

How do you fix a block attribute?

1. Right-click the block and choose Block Editor.
2. Select the attributes (use the QSELECT command if there are many).
3. In the Properties palette, change Invisible to No.
4. Close the Block Editor and save the block.
5. Enter the ATTSYNC command and choose the edited block.

How do I turn off lasso selection in AutoCAD?

This can be done by going to the OPTIONS menu in AutoCAD, Selection Tab, and untick “Allow press and drag for Lasso”: You can also turn this off in the command line, setting the PICKAUTO system variable to 3.

How do I change the selection in AutoCAD?

1. Right-click in the drawing area, and choose Options.
2. On the Selection tab, choose the settings you want. Among other settings, you can set. Whether objects to be selected are previewed during selection. Whether selected objects are highlighted.

What is object selection in AutoCAD?

The selection method is used to select individual objects. It can also be used to select particular objects from a group. Picking drawing elements becomes difficult sometimes as most of the tools require it. The selection methods make the process of selecting drawing elements easier.

How do I turn on highlight selection in AutoCAD?

Why is my AutoCAD not snapping?

Press F3 to toggle osnaps on/off. Check that osnap is On (OSNAP command) and that the snap function is also selected. Flatten the drawing or make sure that all objects are on the same plane, or with the same Z value. Check the value of the AUTOSNAP variable and make sure that it is an odd number.

How do you turn the selection on in cycling?

Enable Selection Cycling from the Status Bar Note: You can also use the Ctrl+W shortcut keys to turn selection cycling on and off. When selection cycling is turned on, a badge appears next to the cursor when you hover over stacked objects.

How do you drag and select in AutoCAD?

To use this selection option click anywhere in the drawing area then type F on the command line and press Enter. Your fence will start from the point of click, now move this fence to touch other objects in the drawing to make the selection.

How do I select part of a drawing in AutoCAD?

1. To crop an AutoCAD drawing, first unlock it by doing the following: Right-click the AutoCAD drawing, point to CAD Drawing Object, and then click Properties.
2. Right-click the AutoCAD drawing and click Crop Tool.
3. Drag the selection handles.
4. When you’re done, click the Pointer tool .

How do I select lines on top of each other in AutoCAD?

You can choose between overlapping objects by pressing Shift+Space or by using the Selection dialog box.