The Command line will prompt you to Specify Scale Factor. Set one of the following scale factors: Convert to Engineering Scale: Type 1/12, and press Enter. Convert to Architectural Scale: Type12, and press Enter.
Beside above, what is an engineering drawing scale? What is a Scale in Engineering drawing? The scales in engineering drawing are the ratio of the linear dimension of an element of an object as represented in the original drawing to the actual linear dimension of the same element of the object itself.
In this regard, what is standard engineering scale? Engineers Engineering Scales units of measure are equal to parts per inch and parts per foot. The most common graduations are 10, 20, 30, 40, 50, 60 parts per inch, but there are scales available that have 100, 200, 300, 400, 500, 600 parts per foot. The graduations vary based on the application.
People ask also, what is a engineer’s scale used for? An engineer’s scale is a tool for measuring distances and transferring measurements at a fixed ratio of length.
You asked, what is a 1 1 scale? The scale of drawings is described as a ratio using the notation: A distance at full size : The distance at the scale used that would be the same length. For example: A full size drawing would be 1:1 (or sometimes 1/1 or ‘one to one’). A half size drawing would be 1:2.
Contents
What does a 1/4 scale mean?
A 1/4″ scale means that each 1/4″ (inch) on the plan counts for 1′ (feet) of actual physical length. To scale a blueprint in imperial units to actual feet. multiply the measurement on the drawing (in inches decimal equivalent) with the denominator.
What are the 3 types of scale?
- Nominal Scale.
- Ordinal Scale.
- Interval Scale.
- Ratio Scale.
What are the four types of scales?
Each of the four scales (i.e., nominal, ordinal, interval, and ratio) provides a different type of information.
What are the 4 main types of scales used for drafting?
Scales used in drafting include the mechanical engineer’s scale, the civil engineer’s scale, the architect’s scale, and the metric scale.
What are architect and engineer scales?
How do you read an engineering drawing scale?
The measured distance on the drawing is the actual distance or size of the component. 3/8″ = 1′ Read as 3/8 inch (on the drawing) equals 1 foot (on the actual component or system). This is called 3/8 scale. For example, if a component part measures 6/8 inch on the drawing, the actual component measures 2 feet.
What is the meaning of 1 100 scale?
Ratio scales If the scale of the plan is 1 : 100, this means the real measurements are 100 times longer than they are on the plan. So 1 cm on the plan represents a real length of 100 cm (1 metre)
What does a scale of 1 20 mean?
What does a 1:20 scale mean. The same goes for a 1:20 scale, which when used, represents a subject at a size 20 times smaller than its real word dimensions. Generally speaking, we have varying types of scale to represent different amounts of detail.
How are architectural and engineering scales divided?
Architect scales have numbers that run incrementally both from left to right and from right to left. A whole number or fraction to the left or right of the number line indicates the scale those numbers represent. Engineer scales have numbers that run incrementally from left to right.
What is Autocad scale?
Scale Factor. Multiplies the dimensions of the selected objects by the specified scale. A scale factor greater than 1 enlarges the objects. A scale factor between 0 and 1 shrinks the objects. You can also drag the cursor to make the object larger or smaller.