- Open the tool palette that you want to use, and select a hidden line projection tool.
- In a 3D view select one or more objects that you want to use to create your hidden line projection, and press Enter.
Amazingly, how do I create a hidden line in AutoCAD 2020?
- Select the layout viewport in which you want to hide the lines.
- Click View tab Palettes panel Properties palette.
- On the Properties palette, under Misc, in the Shade Plot field, select Legacy Hidden.
As many you asked, how do you show phantom lines in AutoCAD?
Beside above, how do you draw a hidden line?
Also the question is, how do you change a line from solid to hidden AutoCAD? Make Hidden Lines Display Hidden In Solids 1.) type VISUALSTYLES in the command line and select
- Select the layout viewport in which you want to hide the lines.
- Click View tab Palettes panel Properties palette.
- On the Properties palette, under Misc, in the Shade Plot field, select Legacy Hidden.
Contents
A hidden line, also known as a hidden object line is a medium weight line, made of short dashes about 1/8” long with 1/16”gaps, to show edges, surfaces and corners which cannot be seen. Sometimes they are used to make a drawing easier to understand. Often they are omitted in an isometric view. Section Line.
What is a phantom line?
Lines that are made visible as dots or dashes to reveal the edges of objects currently hidden from view.
What line is used to indicate imaginary features?
Phantom lines are used to indicate imaginary features.
In a scaled drawing, the hidden line can be measured from the start of the first dash, to the end of the last dash. Centre lines are drawn to indicate the exact centre of a component being drawn. They are made from a series of lighter long and short dashes.
It is standard practice to use dashes to represent any line of an object that is hidden from view.
What does Ltscale do in AutoCAD?
The LTSCALE system variable is used to control the global linetype scale factor in the drawing. Changing this scale factor, the appearance of linetypes in the drawing also changes. For example, an LTSCALE setting of 1 means that the dash length specified in the linetype definition is read directly as drawing units.
What is a visible line?
Visible lines are the edges or “outlines” of an object. They are drawn as solid lines with a thick/heavy weight.
Why are my lines not dashed in AutoCAD?
Most likely your line type scale is set too low. Select your line you want dashed and open the properties on it. Mostly likely it will be 1.0… increase it to around 30 and see how that looks.