How to create custom viewport scale in autocad?

1. Do one of the following to choose Properties ( ): On the ribbon, choose View > Properties (in Display). On the menu, choose Modify > Properties.
2. Select the edge of the layout viewport.
3. In Custom Scale, enter the scale at which you want to view model space entities from within the layout viewport.
4. Click OK.

Additionally, how do I make a custom viewport?

1. If necessary, click a layout tab.
2. Set the current layer to a layer that’s reserved for layout viewports (recommended).
3. Click Layout tab Layout Viewports panel Rectangular, Polygonal, or Object.
4. Follow the prompts.

Quick Answer, how do you create a scale in AutoCAD? All the default scales are displayed, to create a new scale select “Custom”, as shown in Figure 2. This will open the “Edit Drawing Scales” dialogue box as shown in Figure 3. Select “Add” to create a new scale, give the scale a suitable name, this will be the name of the scale displayed in the scale list.

Beside above, how do I change the custom scale in AutoCAD? To add the custom scale select any viewport then click on scale option from the status bar as shown in the image above and select the Custom option from the list of scales. “Edit Drawing Scales” window will open up. Let’s assume that we want to add a scale of 1:6 in this list, for that click on add button.

You asked, how do you create a viewport in AutoCAD? On the Viewports toolbar, click the Layout Viewports tool. Type mview and then press Enter. 2 Specify two opposing corners to create a custom rectangular viewport, or in the prompt box, choose one of the following: Fit To View — Creates a layout viewport that fills the screen.If you need a non-rectangular viewport in paperspace, draw any closed polyline, circle or ellipse in a layout. Then run the _MVIEW command with the _Object option (or menu item: View-Viewports-Object) and so convert your outline entity to an irregular viewport.

How do you make an irregular viewport?

1. Click the Clip tool in the Layout tab’s Layout Viewports panel.
2. At the Select viewport to clip: prompt, click the viewport border.
3. At the Select clipping object or [Polygonal] : prompt, press ↵.
4. Turn off Object Snap, and draw the outline shown in the top portion.

How do I add a scale to my layout?

1. Select Window > Scaled Drawing.
2. In the Scaled Drawing panel that appears, click Make Scaled Drawing.
3. Choose a scale.
4. (Optional) From the Length drop-down list, choose Decimal, Architectural, Engineering, or Fractional.

How do I scale to a specific size in AutoCAD?

Why is my viewport scale not accurate?

Make sure your MEASUREMENT System Variable is set to 0 (Imperial) Make sure you are using 1″ (inch) as your unit and not 1′ (foot). (if you were then check your UNITS set to Inches) and also you will have to scale everything up a factor of 12. — Tracy W.

How do you change the annotative scale of a viewport?

Select a viewport. Right-click in the drawing area and choose Properties. On the Properties window, select the Annotative Scale property and select the scale to set current.

How do I change the scale in AutoCAD Paperspace?

Type PROP and press Enter. Select the viewport scale by doing either of the following procedures. Select an existing scale from the Standard scale option, In the Custom scale option, type the desired ratio between paper space units and model space units.

What is the meaning of 1 100 scale?

Ratio scales If the scale of the plan is 1 : 100, this means the real measurements are 100 times longer than they are on the plan. So 1 cm on the plan represents a real length of 100 cm (1 metre)

How do you create a viewport in model space?

Click the – or + control, and then the Viewport Configuration List to change the number and arrangement of viewports. Press CTRL while dragging viewport boundaries to display the green splitter bar and create new viewports. Alternatively, you can drag the outermost splitter controls.

How do you edit a viewport in AutoCAD?

1. Select the viewport.
2. Select Modify > Edit Viewport.
3. Click Design Layer and select the design layer to edit from the list.
4. Choose how the design layer will display.
5. If the viewport has been cropped, select Add Reference Crop Object to display the crop on the design layer.

How do you make a viewport in paper space?

Turn on your menu bar, then select View/Viewports/New Viewports… or one of the named viewports in the list. Or, type vports at the command line. Either way will pop up the Viewports dialog box.