How to make lines an object in autocad?

1. Click Home tab Modify panel Edit Polyline. Find.
2. Select a polyline, spline, line, or arc to edit.
3. Enter j (Join).
4. Select one or more polylines, splines, lines, or arcs that are located end to end.
5. Press Enter to end the command.

How do I convert lines to objects in AutoCAD?

1. Click on the ‘Home’ tab and go to the ‘Modify’ panel.
2. On the command line type M for ‘Multiple’ then select the polyline, spline, line, or arc to to be joined together and press ‘Enter’.
3. Then at the prompt of ”Convert Lines, Arcs and splines to Polylines?’

How do you change a polyline to an object?

On the command line, enter mappolylinetopolygon. Press Enter. If you already had a selection set, the selected closed polylines are converted.

How do I turn a line into a block in AutoCAD?

A Quick Way to Create a Block in AutoCAD First, press CTRL+SHIFT+C on the keyboard, and then snap to the “insertion” point where you want the block to be defined. Then, select the objects from which you want to make a block and press ENTER.

How do I make a solid object in AutoCAD?

1. If necessary, on the status bar click Workspace Switching and select 3D Modeling. Find.
2. Click Solid tab > Solid panel > Extrude. Find.
3. Select the objects or edge subobjects to extrude.
4. Specify the height.

How do I convert lines to Pline in AutoCAD?

1. At the command line in AutoCAD, type PEDIT.
2. Type M for Multiple.
3. Select the splines.
4. Type Y to Convert Lines, Arcs and Splines to polylines.
5. Specify the precision <0-99>.
6. Press the Esc key to exit the command.

How do you convert lines to Pline?

1. Type PEDIT and Press ENTER.
2. Type M and Press Enter.
3. Select objects and Press Enter.
4. Press Enter.
5. Type J and Press Enter.
6. Press Enter.
7. Press Esc (Escape)

What is Pedit command in AutoCAD?

Edits polylines, objects to be joined to polylines, and related objects. Find. Common uses for PEDIT include joining 2D polylines, converting lines and arcs into 2D polylines, and converting polylines into curves that approximate B-splines (spline-fit polylines).

What is the difference between a line and a polyline in AutoCAD?

The first, it’s important to note the difference between a line or line segment, and a polyline. A line is simply a separate line or segment that is not joined to another line. While a Polyline indicates two or more lines have been joined.

How do you convert multiple lines to one line in AutoCAD?

1. Click Home tab Modify panel Edit Polyline. Find.
2. Select a polyline, spline, line, or arc to edit.
3. Enter j (Join).
4. Select one or more polylines, splines, lines, or arcs that are located end to end.
5. Press Enter to end the command.

How do you turn a line into a block?

1. Create the objects you want to use in the block definition.
2. Click Insert tab Block Definition panel Create Block.
3. In the Block Definition dialog box, enter a block name in the Name box.
4. Under Objects, select Convert to Block.

How do I save a drawing as a block?

Select Save Block As from this menu. The Save Block As dialog box will open. Give the dynamic block a name that follows your office’s naming standards for other similar blocks. Select the option to Save block definition to drawing file.

How do I make an image block in AutoCAD?

How do you draw a surface in AutoCAD?

1. Click Home tab Modeling panel Presspull. Find.
2. Click an edge of 3D object, an open spline, an arc, or another 2D object that does not form a closed area.
3. Enter a value or click in the drawing area to indicate the height of the new surface object.

How do you make a hollow object solid in AutoCAD?

To create a hollow solid: Click Solid tab > Feature panel > Hollow to display the Hollow Solid dialog: Use the dialog to remove a face of a solid and offset it to create a hollow solid.

How do you fill in a box in AutoCAD?

1. Click Home tab Draw panel Hatch.
2. On the Properties panel Hatch Type list, select the type of hatch you want to use.
3. On the Pattern panel, click a hatch pattern or fill.
4. On the Boundaries panel, specify the how the pattern boundary is selected:
5. Click an area or object to be hatched.