Question: Autocad linetype 3d polyline?

1. Start 3D polyline command (command: “3DPOLY”)
2. While still in command type ‘PO (“Point Object” transparent command) in command-line.
3. Click the first point and then on any subsequent points to create the desired line.
4. Hit Enter key.

Also the question is, what is 3D polyline in Autocad? A 3D polyline is a connected sequence of straight line segments created as a single object. 3D polylines can be non-coplanar; however, they cannot include arc segments. The following prompts are displayed. Start point of polyline. Specifies the first point in the 3d polyline.

Quick Answer, how do you convert a 3D polyline to a 2D polyline?

1. Click Modify tab Design panel Convert 3D To 2D Polylines Find.
2. Select the polyline(s) to convert. Press Enter.

Frequent question, how do you convert a feature line to a polyline?

Also, what is 3D polyline? A 3D polyline is a type of 3D object which represents a line in three dimensional space. 3D polylines can consist of one or more 3D points. Each 3D polyline is a member of a 3D polyline group.

How do you draw a polyline in Civil 3D?

1. Click Home tab Draw panel Polyline.
2. Specify the first point of the polyline.
3. Specify the endpoint of the first segment.
4. Switch to Arc mode by entering a (Arc) at the Command prompt.
5. Return to Line mode by entering L (Line).
6. Specify additional segments as needed.

How do you make a 3D polyline?

A 3D Polyline is a specialized version of a polyline that can have different elevation at every vertex. The 3D Polyline command is available from the Draw pulldown menu, from the Draw toolbar or at the Command: line (3DP).

How do I access the Revcloud command in AutoCAD?

To create a simple revision cloud type REVCLOUD on the command line and press enter. Click at rectangular from the command line options and then click at two points in the drawing to make the rectangle. A revision cloud will be made in the drawing area as shown in the image below.

How do I join a feature line in Civil 3D?

1. Click Modify tab Edit Geometry panel Join Find.
2. Select the feature line you want to join other lines to.
3. Select the joining object or enter Multiple to make a selection of multiple feature lines, polylines, or 3D polylines.

How do you flatten a 3D polyline in AutoCAD?

1. Turn off or freeze any hatch layers with hatch patterns so they are not included in the selection.
2. Type FLATTEN at the command line.
3. Select all objects and press the Enter key.
4. Type N for No when prompted to remove hidden lines.

How do I flatten AutoCAD 3D to 2D?

How do I convert 3D to 2D in AutoCAD?

If you are using AutoCAD 2007 and higher, the FLATSHOT command is available to convert 3D solids to flattened 2D views. (Note this command is not available in AutoCAD LT, so use the alternate method described.) Click Application menu > Print > Manage Plotters. Double-click the Add-a-Plotter Wizard shortcut icon.

How do you make an alignment on a feature line?

How do you flatten survey figures in Civil 3D?

In the Figure Style dialog > 3D Geometry tab, set the Figure display mode to Flatten figure to elevation and confirm that the Flatten figure to elevation is set to 0.00. In the Figure Style dialog > Display tab, change the layer, color, linetype, and so on to meet your CAD standards then click OK.

How do I add a feature line to my surface?

1. Right-click a feature line Add To Surface As Breakline. Note.
2. In the Select Surface dialog box, select a surface, and press OK. Or, select the Add button to create a new surface.
3. In the Add Breaklines dialog box, specify the breakline options. Press OK.