The Command line will prompt you to Specify Scale Factor. Set one of the following scale factors: Convert to Engineering Scale: Type 1/12, and press Enter. Convert to Architectural Scale: Type12, and press Enter.
Correspondingly, how do you convert an architectural scale to an engineering scale?
As many you asked, how do I change my AutoCAD scale?
- How to scale down in AutoCAD – Window select the object(s) in AutoCAD, type SCALE, and then specify a number between 0 and 1. Hit Enter.
- How to scale up in AutoCAD – Window select the object(s), type SCALE, and then specify a number larger than 1. Hit Enter.
Quick Answer, how do you use an engineer’s scale? Engineer scales have numbers that run incrementally from left to right. The whole number to the left of the number line indicates the scale those numbers represent. The scale marked “16” is a standard ruler. You must learn to read both from left to right, and right to left.
Beside above, how do you convert engineering scales to inches? To calculate how many inches in the measurement you have, multiply the decimal by 12. For example, if the measurement is 100.2 feet, multiply 0.2 by 12 to get 2.4 inches.Referred to as 1:10, 1:20, 1:30,1:40, 1:50 or 1:60 scale. Typically in civil engineering applications, 1:10 (1″=10′) is used exclusively for detail drawings. 1:20 and 1:40 scales are used for working plans. 1:60 is normally used only to show large areas of a project.
Contents
How do I change scale in AutoCAD Architecture?
- Click Utilities Drawing Setup.
- Click the Units tab.
- Under Drawing Units, select the desired units.
- To scale objects that you insert into the current drawing from drawings with different drawing units, select Scale Objects Inserted from Other Drawings.
What is the use of scale command in AutoCAD?
Using scale command you can change the size of an object in AutoCAD. To explain scale command I will use this simple window block which has the size of 10 unit along the X-axis and 15 units along Y-axis. Select the scale tool from Modify panel of the home tab or use its command SC.
How do I change the scale without changing dimensions in AutoCAD?
How do you find the scale in AutoCAD?
- Click View tab Viewports panel Scale Monitor. Find. The Scale Monitor dialog box is displayed.
- In the drawing area, move the cursor over the scale area (or a viewport ) and check the Scale Monitor dialog box.
- Press ENTER to exit this command.
What is the difference between architect and engineer scale?
Although similar in appearance to an architect’s scale, the engineering scale is designed to be more precise and has a decimal scaling scheme whereas an architect’s scale uses fractional scaling. It is designed to only be read from left to right. An architect’s scale can be read from either the left or right side.
How do you scale an engineering drawing?
The measured distance on the drawing is the actual distance or size of the component. 3/8″ = 1′ Read as 3/8 inch (on the drawing) equals 1 foot (on the actual component or system). This is called 3/8 scale. For example, if a component part measures 6/8 inch on the drawing, the actual component measures 2 feet.
How do you use a metric engineering scale ruler?
How do you convert a decimal to inches?
How do you convert hundredths to inches?
What engineer scale is most commonly used?
Metric Engineering Scales – metric scale measurements is the standard in most of the world. The principles are similar. You have to get used to measurements expressed in meters (m) and millimeters (mm). One meter is slightly larger than one yard.