- Enter LINETYPE to open Linetype Manager.
- Click Show Details.
- Deselect Use Paper Space Units for Scaling.
- Click OK.
- Double-click into the viewport to activate it.
- Enter REGEN.
Frequent question, how do you scale a paper space in AutoCAD? To set a scale in a Paper Space viewport, click within the viewport to make it active. Select No from the Display Locked menu in the Properties panel. The viewport will be unlocked. Center your view in the viewport, and make sure it’s set to a 1:1 scale.
Furthermore, how do I change the scale of a viewport line?
- With PSLTSCALE set to 1 (default), set the current linetype to dashed, and then draw a line in a paper space layout.
- In the layout, create a viewport with a zoom factor of 1x, make that layout viewport current, and then draw a line using the same dashed linetype.
You asked, how do I set line scale in AutoCAD? To change the linetype scale, click the Linetype drop-down list in the Properties panel of the Home tab and choose Other to open the Linetype Manager. Click Show Details if the lower portion of the dialog box isn’t displayed. In the Global Scale Factor text box, type the scale factor that you want. Click OK.
Similarly, how do you make a linetype scale the same in viewport? Type PSLTSCALE in the Command line, and type 1 when prompted to Enter a value. The linetype scale of this Viewport (in Paper Space) will now match the linetype scale you’ve already set in the original drawing (in Model Space).
Contents
How do I fix linetype scale in AutoCAD?
How do you scale a viewport in paper space?
- Click the Model tab.
- Click a viewport to make it current.
- Choose View > Zoom > Zoom.
- Type the zoom scale factor relative to paper space by appending the suffix xp to the scale factor, and then press Enter.
How do you scale from model space to paper space?
- Go to Home tab > Modify panel (expanded)> Change Space to start the CHSPACE command.
- At the prompt, select one or more objects to move.
- Press Enter to end selection and the command. AutoCAD moves the selected objects to the other space.
Why is my viewport scale not accurate?
Make sure your MEASUREMENT System Variable is set to 0 (Imperial) Make sure you are using 1″ (inch) as your unit and not 1′ (foot). (if you were then check your UNITS set to Inches) and also you will have to scale everything up a factor of 12. — Tracy W.
Where is linetype scale in AutoCAD?
Linetype Scale and Short Segments You can change the linetype scale of the object in the Properties palette to get the desired look.
What is the formula for scaling in layout?
When you work in a layout, the scale factor of a view in a layout viewport represents a ratio between the actual size of the model displayed in the viewport and the size of the layout. The ratio is determined by dividing the paper space units by the model space units.
Why is my linetype scale not changing in AutoCAD?
If you change the linetype of a layer or an object but the object remains a continuous line, check the Ltscale system variable. It should be set to your drawing scale factor. If this doesn’t work, set the Viewres system variable to a higher value.
What is annotative scaling?
Annotative scaling is the process in which you select a scale for a drawing and all the annotative text, dimensions, blocks and hatches change to reflect the scale. This can also be set independently for each viewport so multiple scales can show on one sheet drawing.
How do I set Ltscale and Psltscale in AutoCAD?
What command do you use to scale a viewport?
Double click within the viewport boundaries. Then, type Zoom and the Command Line. Next, enter the scale you would like to use. In this case, I’ll use 1/50.