- Click the Model tab.
- Click a viewport to make it current.
- Choose View > Zoom > Zoom.
- Type the zoom scale factor relative to paper space by appending the suffix xp to the scale factor, and then press Enter.
Contents
How do I change the scale of a viewport line?
- With PSLTSCALE set to 1 (default), set the current linetype to dashed, and then draw a line in a paper space layout.
- In the layout, create a viewport with a zoom factor of 1x, make that layout viewport current, and then draw a line using the same dashed linetype.
How do I change the scale in AutoCAD Paperspace?
To set a scale in a Paper Space viewport, click within the viewport to make it active. Select No from the Display Locked menu in the Properties panel. The viewport will be unlocked. Center your view in the viewport, and make sure it’s set to a 1:1 scale.
Why is my viewport scale not accurate?
Make sure your MEASUREMENT System Variable is set to 0 (Imperial) Make sure you are using 1″ (inch) as your unit and not 1′ (foot). (if you were then check your UNITS set to Inches) and also you will have to scale everything up a factor of 12. — Tracy W.
How do you scale page layout in AutoCAD?
Type PROP and press Enter. Select the viewport scale by doing either of the following procedures. Select an existing scale from the Standard scale option, In the Custom scale option, type the desired ratio between paper space units and model space units.
How do I change the viewport linetype scale in AutoCAD?
Do one or more of the following: In the layout, double-click inside a viewport to activate it, then type PSLTSCALE and set it to either 0 or 1.
How do you scale from model space to paper space?
- Go to Home tab > Modify panel (expanded)> Change Space to start the CHSPACE command.
- At the prompt, select one or more objects to move.
- Press Enter to end selection and the command. AutoCAD moves the selected objects to the other space.
What is the meaning of 1 100 scale?
Ratio scales If the scale of the plan is 1 : 100, this means the real measurements are 100 times longer than they are on the plan. So 1 cm on the plan represents a real length of 100 cm (1 metre)
What does the scale 1/100 convert to?
A scale of 1 to 100 is indicated on a drawing using the code 1:100. This can be interpreted as follows: 1 centimetre (0.01 metre) measured with a ruler on the plan would need to be multiplied by 100 to give the actual size of 1 metre.
How do you set a digital scale?
What is xref scale?
INSUNITS specifies a drawing-units value for automatic scaling of blocks, images, or xrefs when inserted or attached to a drawing. If the INSUNITS values are different between the host drawing and the xref, AutoCAD scales the incoming xref to match the current scale.
What is the annotation scale in AutoCAD?
Annotation scale is used to determine text height or the overall scale of an annotation object. The approach used to calculate an annotation scale depends on whether the object is placed in model space or on a layout.
How do you scale a viewport?
- Select the layout viewport that you want to modify.
- Right-click, and then choose Properties.
- If necessary, click Display Locked and choose No.
- In the Properties palette, select Standard Scale, and then select a new scale from the list.
What command do you use to scale a viewport?
Double click within the viewport boundaries. Then, type Zoom and the Command Line. Next, enter the scale you would like to use. In this case, I’ll use 1/50.
How do I set the page size and scale for plotting in AutoCAD?
How do you make a linetype scale the same in viewport?
Type PSLTSCALE in the Command line, and type 1 when prompted to Enter a value. The linetype scale of this Viewport (in Paper Space) will now match the linetype scale you’ve already set in the original drawing (in Model Space).