Contents
How do you extrude a line in Fusion 360?
Can we extrude a line?
extrude allows you work with closed profile. Line doesn’t have the profile. I would recommend you to create sketch with circles or another shapes and extrude it. With extruded feature you can create pattern.13 avr. 2015
What is extrude in Fusion 360?
Well, let me tell you. The Fusion 360 extrude tool can be used 100 different ways. … The “From Object” will allow you to select a construction plane, face, point, etc. to drive where the extrude will start. Take it to the next level and play around with the offset distance from the selected object.4 avr. 2017
How do you make slits in Fusion 360?
How do you thicken a body in Fusion 360?
How do you remove extrude in Fusion 360?
How do you remove extrude in Fusion 360? since your time line is on, good practice would be to find the extrusion in the time line and either edit it, or delete it. you can also select all the faces associated with the extrude and delete them. Fusion will heal the model back.
What happens if you fillet these two lines with radius 0?
Note: If the fillet radius is set to 0, the selected objects are trimmed or extended until they intersect; no arc is created. When the fillet radius is set to 0, you can remove the arc segment between two straight line segments or all arc segments from a 2D polyline.4 fév. 2019
What’s the difference between extrude and Presspull?
If you use the Presspull command on an existing face then a simple extrusion will be created but if you press and hold the CTRL key and then use Presspull command on the surface then the extrusion will follow the geometry along the profile of 3D solid as shown in the image below.27 avr. 2020
What is the difference between extrude and press pull command?
Difference between Extrude/PushPull commands: Extrude works on sketch profiles and/or planar faces. PushPull works on faces and/or edges. Invoking PushPull on a sketch profile turns it into an Extrude command.13 août 2016
How do you make a negative extrude in Fusion 360?
How do you switch from surface to solid in Fusion 360?
1. In the Design ribbon along the top of Fusion, select the Surface tab.
2. From the modify dropdown select Stitch.
3. Select all the surfaces to stitch together.
4. On the stitch dialog set the operation to New Body.
5. Select OK to close the dialog and create the Body.
How do you use the shell 360 Fusion command?
How do you view history on Fusion 360?
Solution: Right click on the top level component in the browser tree and click Capture Design History.19 août 2020
How do you reverse extrude?
1. Extrude all but the face you want to reverse extrude ( E )
2. Right click to cancel move.
3. Inverse selection ( CTRL+I )
4. Unselect vertices from bottom ( C and WheelClick )
5. Move the loop ( G+Z vertical, or G+G for any direction)
How do I delete extrusions in Autocad?
Check the circle extrusion in the Properties palette and see if it says Surface or 3D Solid. If you explode the solid it will change to a surface. You can then delete the surface and have just the circle.19 jan. 2019