Contents
What does the revolve tool do in Fusion 360?
Fusion 360’s revolve tool is capable of creating surface features. The profile will be an open profile that will have complete dimensions that are linear. The centerline to the right of the open profile is a construction line that also mimics the linear dimensions placed on the right.8 août 2020
What is revolve in fusion?
The Revolve command creates T-Spline, solid, or surface revolved features by sweeping sketch and model geometry around an axis. Note: When you invoke the Revolve command, and there is only one profile visible in your design, it gets automatically selected.
How do you use revolve?
1. Select a sketch.
2. Click Revolve from the mini toolbar or the Shapes group.
3. Select an axis for the revolve.
4. Select Solid from the dashboard.
5. Specify to revolve from a sketch plane by a specified angle value.
6. Edit the angle to 180.
7. Click Flip Direction.
8. Click Thicken Sketch.
How do you rotate in fusion?
1. Basic Mouse control diagram for Fusion 360.
2. ROLL the roller to ZOOM in and out.
3. LEFT CLICK the mouse to SELECT.
4. HOW TO ORBIT THE WORKPLANE to rotate the screen to.
5. 1) HOLD DOWN the keyboard SHIFT key + at the same time, HOLD DOWN the.
6. mouse ROLLER, move the mouse around to rotate the screen.
How do you extrude along a path in Fusion 360?
How do you use circular patterns in Fusion 360?
1. Click Design > Solid > Create > Pattern > Circular Pattern .
2. Select the Pattern Type from the dropdown menu:
3. Select Objects to pattern in the canvas.
4. Select the Axis to pattern along in the canvas.
What is required to create a sweep Fusion 360?
What are the two components necessary for creating a revolve feature?
There are two ways to created revolved features: from a sketch profile or from a primitive. The primitive shape creation commands create full revolutions only. They do not create surfaces or partial revolutions.8 fév. 2016
What is needed to revolve a feature?
A revolved feature is an axisymmetric shape that is created by revolving an open or closed section view by a specified angle around a central axis. The section can represent a protrusion or a cut, that is, it can either add material or take it away. We are going to create the part shown in Figure 1.
How do you revolve in Solidworks?
1. Create a new 2D sketch.
2. Create all solid sketch geometry on one side of the axis.
3. Choose Revolve Boss/Base from the features menu.
4. Pick the axis you wish to use for the revolve.
5. Specify direction and angle.
6. Accept the Feature.
How do you extrude an angle in Fusion 360?
How do you make a 3D sketch in Fusion 360?
1. Select the Solid tab in the Design workspace. Select Create Sketch in the toolbar.
2. Select the initial plane or face to begin the sketch on.
3. Check the 3D Sketch box in the Sketch Palette.
How do you twist a shape in Fusion 360?
What is suppress in Fusion 360?
This allows you to make patterns in which you don’t necessarily want ALL of the indicated copies to actually get created. Yes, definitely a handy option. I would suggest, however, that the word “Suppress” is a bit odd.9 mai 2019