Contents
How do I change hatch in MicroStation?
MicroStation V8. 5 – To quickly and easily change the symbology of hatching, select Modify Pattern, enable Attributes and select the hatch. The hatch will adopt your active attributes.19 jui. 2008
How do I change the scale in MicroStation?
1. Open the Level Manager (Settings>Level>Manager)
2. Right click on the level name and select Properties.
3. Select the Styles tab.
4. Select either the Bylevel or the Overrides section.
5. Check on the Scale option.
6. Set the scale factor.
How do I change hatch pattern in MicroStation connect edition?
1. Create new element template.
2. Add>Pattern/Hatch Settings.
3. Change Area Pattern Is Annotation value to True(this should be the default value)
How do I use the hatch area in MicroStation?
To hatch around text inside of a closed element use the Flood method, select the down arrow in the lower right corner of the Tool Settings window to “Show Extended Settings”. Select the Locate Interior Text icon. Using this option will cause the hatching to go around the text within the closed element.
How do you trim hatch in MicroStation?
1. Select the edges bounding the concrete and the square shape that you don’t want patterned.
2. Isolate the selection using Displayset.
3. Repattern the area using the following settings (obviously set Pattern/Scale/Angle as required)
How do you match Hatch properties in MicroStation?
MicroStation V8. 5 – If you use the SmartMatch tool on a hatched/patterend element, it will match the symbology of the boundary element and not the hatch. To match the symbology of the hatching, select Match Pattern Attributes and enable Match Symbology.19 jui. 2008
How do you use the 3 point scale in MicroStation?
1. Select the Scale Raster tool ( Drawing > Attach > Raster ).
2. Choose 3 Points Scale from the Method option menu.
3. Enter a data point at the same location, whatever the scale.
4. Enter a second data point on the image.
What is true scale in MicroStation?
True Scale It deals with transforming units between two models while attaching reference. It specifies the appropriate scale factor to convert actual units in the referenced model to the units in the active model for reference attachment.
How do I change line properties in MicroStation?
1. From the Main Task go to the Change Attributes tool bar.
2. Click the Modify Line Style Attributes icon.
3. In the Tool Settings dialog choose [Shift].
4. Select the custom linestyle and then move your cursor to dynamically shift the linestyle to place the symbol or text at a better location.
How do you join lines in Microstation?
Press “Alt + T” to drop down the tools menu and from “Groups” select the very first option that says “Create Complex Chain.” Go ahead and click the 2 lines that you would like to join and then click anywhere a third time. Your lines are now a singular element. Or even more simply, a Line.
How do I fill an area in Microstation?
How do I create a pattern in Microstation?
1. Open the Cell Library dialog box by going to Element>Cells.
2. Choose the cell you would like to use as your pattern, and click on Pattern.
3. Open the Pattern Area tool, which can be done by going to Tools>Patterning>Pattern Area.
How do you send a hatch to back in MicroStation?
1. Select the element(s) to be sent to back.
2. Open the Level Display dialog and turn on all of your levels.
3. Using Power Selector invert mode select every element in your model.
How do you flood a pattern in MicroStation?
Annotate > Hatch Tool (Flooded) > Press Ctrl + Shift > Select the areas to flood.24 fév. 2017