Contents
How do I create sections in MicroStation?
To create sections in 3d models, place the clip volume where needed, then RMB on top of cliping elment and Align View To Clip Volume, and save view with association turned on. You can create drawing model where should be the place for annotations.1 déc. 2017
How do I see the cross section in MicroStation?
Under Surfaces: toggle on the surface that you want to show on the cross sections. Click Apply Click a spot in the MicroStation window where you want the cross sections to be displayed. The Cross Sections should be displayed there.21 août 2014
How do you print cross sections in MicroStation?
To print the Sheet Number on Construction Plan Sheets, click on “File” and “Save” and then click on “File” and “Print”. To print the Sheet Number, Project Number, Control Number, Horizontal and Vertical Scales on Cross Section Sheets, click on “Edit” and click on “Select All”.
How do you unlock elements in MicroStation?
Unlock these element under the menu > Edit > Unlock.27 août 2014
How do I view cross sections in Openroads?
How do you cut a cross section in InRoads?
1. Select Cross Sections > Update Cross Section from the InRoads bar menu. 2. On the General leaf, select the Cross Section Set to be updated using the drop down menu or
How do you create a road in Microstation?
How do you create a cross section in Geopak?
1. Access the Draw Cross Sections dialog, using either of the following methods.
2. Applications > Geopak > Road > Cross Sections > Draw Cross Sections from Surfaces.
3. From the Corridor Modeling dialog “Draw Cross Sections from Surface” icon, as shown below:
How do I create a spreadsheet in Openroads?
How do I turn off level lock?
LEVEL LOCKS By default, the level lock is off. You can turn this lock on through the Locks settings dialog. To display this dialog, from the main menu select Settings menu > Locks > Full.
How do I unlock a ProjectWise file?
1. Expand the Deliverables Management node under your associated work area.
2. Expand the Outgoing folder and select the Transmittals folder.
3. Open the transmittal containing the response you want to unlock and select the Responses tab.
How do I freeze a layer in Microstation?
If you want to freeze elements in levels, select Global Freeze. You can also control level display with the Global Display or View Display modes. Alternatively, you can use the Level Manager dialog box to control element display and freeze settings on a level-by-level basis.
How do you do an alignment on open roads?
How do I align my InRoads?
1. Select Geometry > View Geometry > Horizontal Annotation from the InRoads main menu. 2. Verify the settings as shown above and click Apply to display the alignment annotation.
How do I create a Geopak profile?
1. Open the Project Manager, go to Directory>Current Working Directory, next Select Project, Select OK, and then Select User [name] from Project Users menu.
2. Select Existing Ground Profile tab on the Project Manager menu.
3. Select created run and then select OK.
4. Profile Name.
5. Job Number.