Contents
How do I change orientation in MicroStation?
MicroStation V8i introduces a quick tool to seamlessly swap the orientation of an attachment. In Figure 1, Look at the new column in the References dialog, titled Orientation. This is similar to the Orientation options in the “Reference Attachment Settings” dialog (Figure 2) when you attach a new reference.
How do I rotate in MicroStation connect?
How do you twist view in MicroStation?
To rotate a view across a specific plane enable AccuDraw and press
How do you rotate an axis in MicroStation?
1. Ribbon: View > Viewing Aids > AccuDraw > Rotate.
2. Default keyboard shortcut:
How do you rotate 90 degrees in MicroStation?
Did you know that you can rotate an isometric view in 90 degree increments by using the following Key-Ins; For a Clockwise rotation key-in: RV=- 54.5,-54.5,-90 and select the view for rotation, for a Counter-Clockwise rotation key-in: RV=-54.5,54.5,90 and select the appropriate view.
What is a reference orientation?
April 5, 2010. New in MicroStation V8i (SELECTseries 1) is the ability for an existing attachment to have its attachment method changed without having to detach and then reattach the reference.5 avr. 2010
How do you rotate text in MicroStation?
This sets the active angle by selecting any two points on the element you wish to match the angle of (MicroStation prompts you to enter a vertex, but any two points on the element will set the angle), then use the ROTATE ELEMENT tool to rotate the text item to that angle.10 jui. 2014
How do I rotate 3d in MicroStation?
How do you rotate AC in MicroStation?
To rotate the active ACS Select the Rotate Active ACS tool. The Rotate Active ACS dialog box opens. In the Rotate fields, enter the rotation angles, in degrees, from left to right, for the x-, y-, and z-axes.
How do you rotate view in Aecosim?
1. Select the Rotate View control .
2. Set Rotate View Method to 2 Points.
3. Enter a data point to select the view to rotate and define the origin of the view x-axis.
4. Enter a data point to define the positive direction of the view x-axis.
What is ACS in MicroStation?
ACS (Auxiliary Coordinate Systems)25 fév. 2014