Contents
How do you trim a line in MicroStation?
How do you clip in MicroStation?
In the tool settings, click the Apply Clip Mask By 2 Points icon. Enter 2 data points to define diagonally opposite corners of a rectangular clip element. If only one view is open, then the clip mask is applied. If more than one view is open, enter a data point in the view to which clipping is required.
How do I edit lines in MicroStation?
How do I cut a profile in MicroStation?
How do I change the length of a line in MicroStation?
1. Edit placed text node.
2. Go the textstyle dialog by selecting the text styles button on the Edit Text tool settings.
3. Go to the spacing section under the Advance tab.
4. Change the value of the line length.
5. Modify text and accept changes by clicking left mouse button.
How do I match line type in MicroStation?
1. Go to the Change Attribute tool.
2. Click on eyedropper(Match Element Attributes)
3. Select the attributes you want to match by checking appropriate boxes.
4. Select new element to apply the attributes from first element.
How do you clip a fence in Microstation?
1. To define the reference clipping boundary’s position, place a fence over the desired clip area.
2. In the References dialog’s list box, select the references to include in the clip boundary set.
3. Click the Clip Reference icon.
4. The Set Reference Clip Boundary tool settings window opens.
How do I edit clip boundary in Microstation?
1. Highlight a Reference.
2. Select an element in the Reference and its clip boundaries will. appear with a dashed line.
3. Select a clip boundary and handle s will appear at the clip boundary. vertices.
4. Select a handle to modify the clip boundary.
How do you cut a raster image in Microstation?
In the Raster Control tool box, select the Clip tool. In the tool settings, set Method to Fence or Element, as appropriate, and Mode to Clip Boundary. Fence is an available option only if a fence is present in the design. If more than one raster image is attached, identify the image to be clipped.
How do I see attributes in MicroStation?
1. From the References dialog box select the Reference File in the dialog you want to work with.
2. From the Reference dialog box pull down menu Settings > Presentation.
3. Check ON Use View Flags.
4. Toggle ON or OFF the View Attributes you want for the reference file.
How do you join two lines in MicroStation?
Press “Alt + T” to drop down the tools menu and from “Groups” select the very first option that says “Create Complex Chain.” Go ahead and click the 2 lines that you would like to join and then click anywhere a third time. Your lines are now a singular element. Or even more simply, a Line.
How do I extend multiple lines in MicroStation?
Extend Line MicroStation prompts: Extend Line > Identify the element (Identify the element near the end to be extended or shortened.) Extend Line > Accept or Reject (Select next input) (Drag the element to the new length and click the Data button to accept, or click the Reject button to disregard the modification.)
What is cut feature?
A cut is a feature that removes material from a part or an assembly. With multibody parts, you can use cuts to create disjoint parts. You can control which parts to keep and which parts are affected by the cut.
How do I create an InRoads profile?
Select Evaluation > Profile > Create Profile from the InRoads main menu. The Create Profile dialog will appear.
How do I create an alignment in InRoads?
1. Select Geometry > View Geometry > Horizontal Annotation from the InRoads main menu. 2. Verify the settings as shown above and click Apply to display the alignment annotation.