Contents
How do you read a floor plan of a house?
1. Compass mark. The compass mark shows which direction is north.
2. Dimensions and scale. Look for the dimensions of the rooms of the floor plan.
3. Furniture. Make sure there is a furniture layout on the plan.
4. Walls.
5. Windows.
6. Doors.
7. Entries.
8. Stairs.
How do you read floor plan symbols?
How do you read a plan?
How do you read a site plan?
1. Find The Title Block. In the bottom right corner of most plans, you’ll find what’s called a title block.
2. Learn the Plan’s Scale.
3. Determine the Orientation of the Plan.
4. Know the Datum Point.
5. Note the Site’s Contours.
6. Locate Existing Structures.
What does C stand for on a floor plan?
Cooker
What does T in a circle mean on floor plans?
Electrical Symbols A small circle bisected by two parallel lines is a wall outlet, while a circle superimposed over an X is a ceiling light and a T hanging from a circle is a thermostat.
What is a bubble diagram?
Bubble diagrams are systems of lines and circles used in architecture to show relationships between functional areas of a program to develop an architectural plan. … Bubble diagrams do appear in handbooks for practicing architects and articles on design education.
How important is making a plan?
It helps keep you from spending time on tasks that won’t bring you closer to your goal. Planning your life gives you control. If you create a plan then you get to make choices and decisions, rather than leaving things up to chance, or worse yet, letting others make decisions for you.
How do you read CAD drawings?
1. Look at the legend. The legend or key, usually located near the lower right-hand corner of the drawing, should explain all of the symbols on the drawing.
2. Read the notes. Particularly near things like windows and doors, CAD drawings have lots of notes.
3. Pay attention to lines.
How do you read a basic blueprint?
1. Begin with the title block. The title block is the first piece of information you’ll see in construction site plans.
2. Study the plan legend.
3. Find the blueprint’s scale and orientation.
4. Look for notes from the architect.
What should be included in a site plan?
1. Property Lines and Setbacks.
2. Easements.
3. Construction Limits and Lay Down Areas.
4. Existing and Proposed Conditions.
5. Driveways.
6. Parking.
7. Surrounding Streets and Ground Sign Locations.
8. Fire Hydrants.
How do you read earthworks plans?
1. Lot size and coverage.
2. Earthwork estimate – cut/fill.
3. Sections.
4. Contour lines.
5. Spot elevations – existing grade, finished grade.
6. Drainage flow direction.
7. Property line.
8. Setbacks from each face of the building.
What is the scale of the site plan?
The scale of a site plan or is typically 1:1250. This means the map, when printed onto an A4 sheet would be 1250 times smaller than the location in real life. So for example 1 cm on the map would cover 1,250 cm in the actual site location, that’s 12.5 metres.18 avr. 2013
What are the architectural symbols?
1. Services symbols.
2. Lighting symbols.
3. Electrical symbols.
4. Plan, elevation and section symbols.
What does B mean on floor plan?
B – Boiler / Bathroom / Bidet. B/ – Bottom (of)20 juil. 2021