Contents
How do you read a road drawing?
How do you read a construction plan?
How do you read elevations on construction plans?
How do you read station numbers on blueprints?
Station numbers usually increase from the beginning of the project to the end of the project. Also, stationing usually runs from South to North or from West to East. The beginning station of a project is usually arbitrary. Generally, it will be 10+00 or 100+00.
How do you read a site plan?
1. Find The Title Block. In the bottom right corner of most plans, you’ll find what’s called a title block.
2. Learn the Plan’s Scale.
3. Determine the Orientation of the Plan.
4. Know the Datum Point.
5. Note the Site’s Contours.
6. Locate Existing Structures.
How many feet are in a station?
STA is short for “Station”. Each Station is 100 feet, which is a unit of measurement throwback to the old 100 foot chains surveyors used to mark distances with. In this standard station notation, you show how many “stations” you have gone plus how many feet you have gone.
What are the 6 types of construction drawings?
1. Plans.
2. Interior and exterior elevations.
3. Building and wall sections.
4. Interior and exterior details.
5. Schedules and room finishes.
6. Framing and utility plans.
What are the five phases of construction?
A construction project entails 5 important stages: initiation, planning, implementation, performance and monitoring, and closing.
What is construction plan?
It involves the choice of technology, the definition of work tasks, the estimation of the required resources and durations for individual tasks, and the identification of any interactions among the different work tasks. A good construction plan is the basis for developing the budget and the schedule for work.
What are the 4 elevations?
Generally, elevations are produced for four directional views, for example, north, south, east, west. Simple elevation drawings might show: The outline of a building.4 déc. 2020
How do you read elevation?
To find an elevation, simply set the rod foot at any location on the job within the range of your laser or optical instrument. Run the detector and / or front rod section up or down until you pick up the “on grade” signal from your detector. Read the number opposite the pointer. That number is your true elevation.
What is a section plan?
A ‘section drawing’, ‘section’ or ‘sectional drawing’ shows a view of a structure as though it had been sliced in half or cut along another imaginary plane. … Plan drawings are in fact a type of section, but they cut through the building on a horizontal rather than vertical plane.8 fév. 2021
How do you read a basic blueprint?
1. Begin with the title block. The title block is the first piece of information you’ll see in construction site plans.
2. Study the plan legend.
3. Find the blueprint’s scale and orientation.
4. Look for notes from the architect.
What is PGL in civil engineering?
PGL Stands For Profile Grade Line| Programmable Gain Low. « First. ‹ Previous. Next ›
What should be included in a site plan?
1. Property Lines and Setbacks.
2. Easements.
3. Construction Limits and Lay Down Areas.
4. Existing and Proposed Conditions.
5. Driveways.
6. Parking.
7. Surrounding Streets and Ground Sign Locations.
8. Fire Hydrants.