Contents
How do you make a sloped work plane in Revit?
1. Create 1 work plane based on a reference plane (blue) with an angle.
2. Create a section paralel to that reference plane.
3. In the section view, create another work plane based on a reference plane (red) to be possible place the extrusion for the table leg.
How do you create a work plane in Revit?
1. Name—Choose an available work plane from the list, and click OK.
2. Pick a plane—Revit creates a plane coincident to the selected plane.
How do you make a sloped extrusion in Revit?
1. Display an elevation, 3D, or section view.
2. Click Architecture tab Build panel Roof drop-down (Roof by Extrusion).
3. Specify the work plane.
4. In the Roof Reference Level and Offset dialog, select a value for Level.
5. To raise or lower the roof from the reference level, specify a value for Offset.
Where is reference plane in Revit?
1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane)
2. To draw a line: On the Draw panel, click (Line).
3. To pick an existing line: On the Draw panel, click (Pick Lines).
How do you lock an extrusion to reference a plane?
Reference planes are used as construction and guide lines. While in a sketch mode (or after finishing the sketch), a line in an extrusion can be locked with the reference plane it’s on top of by using the align tool to click both lines and then clicking the lock icon (see Figure 11).14 déc. 2015
How do you reset a work plane in Revit?
1. Select a work plane-based element in a view.
2. Click Modify |
3. In the Work Plane dialog, select another work plane.
4. If needed, reposition the element on the work plane.
What is a work plane in Revit?
A work plane is a virtual 2-dimensional surface used as the origin for a view or for sketching elements. Work Plane Set or Show or Viewer. on the Architecture, Structure, or Systems tab in projects. on the Create tab of the Family Editor.21 jan. 2021
How do you create a vertical plane in Revit?
1. On the Draw panel, click (Pick Lines).
2. On the Options bar, specify an offset, if desired.
3. Select the Lock option to lock the reference plane to the line.
4. Move the cursor near the line to which you want to place the reference plane and click.
How do you create an extrusion in elevation in Revit?
How do you create a diagonal model in Revit?
What is the use of reference plane in Revit?
Use the Reference Plane tool to draw reference planes to use as a guideline in your design. Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Use the Line tool or the Pick Line tool to draw a reference plane.22 juil. 2021
How do I create a reference level in Revit family?
1. Open the section or elevation view to add levels to.
2. On the ribbon, click (Level). Architecture tab Datum panel (Level)
3. Place the cursor in the drawing area and click.
4. Draw level lines by moving the cursor horizontally.
5. Click when the level line is the correct length.
What is the difference between reference plane and reference line in Revit?
What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.31 août 2015
How do you lock a reference plane in Revit?
Use the Align tool and select the specific reference plane and the sketch line to establish the constraint. When the lock symbol displays, click it to lock the constraint.17 mai 2015
What is the Extrude command used for?
The Extrude command in AutoCAD 3D is used to create a surface or solid of a 2D surface or a 3D curve. The Extrude command is widely used to create walls, shapes, etc.